- Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
- Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
- Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
- Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
- Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
- Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
Sensor head with magnetic tape for shaft 300...3183 mm
- Position resolution (Singleturn): up to 20 bits.
- Speed resolution: up to 18 bits.
- Output signals: SSI.
- Input for setting the zero position and selecting the direction of rotation.
- Status indication: via System OK output and LED.
- Large mounting tolerances.
art. 11033327
- Circumference: 50 cm / 0.5 m
- Hole: 7mm
- Outer Diameter: 159.15 ± 0.2 mm
- Cover profile: rubber handle with rubber crumb
ms2n03
- Supply voltage: 24 V DC
- Power consumption: from 30 to 150 W
- Max. current: from 2.5 to 12.5 A
- Switching frequency: 16 kHz
- Insulation class: F
ms2n05
- Nominal voltage: 230/400 V AC
- Network frequency: 50/60 Hz
- Rated current: from 2.2 to 18.5 A
- Maximum current: up to 27.8 A
- Power factor: 0.85
- Efficiency class: IE2
ms2n06
- Nominal body temperature: 120°C
- Cooling method: natural or forced
- Maximum power: up to 12 kW
- Maximum speed: up to 8000 rpm
Festo MS4-DE
| Pneumatic connection, port 1 | G1/4 |
| Standard nominal flow rate (standardised to DIN 1343) | 2000 l/min |
| Operating pressure | 4 bar - 10 bar |
Track and Trace Controller
Emotron MSF085. Softastarter for motors of 45 KW.
Festo MSFG
Pneumatic rotary actuator with 190 angle of rotation
Battery operated
| version | full metal |
| sensor type | differential hall sensor |
| working distance max. | 1,6 mm (module 1,5) |
| operating temperature | -40 ... +120 °C |
| version | full metal |
| sensor type | differential hall sensor |
| working distance max. | 2 mm (module 2) |
| operating temperature | -40 ... +120 °C |
A Bosch Rexroth hydraulic control unit is a modular component used to control the flow and pressure of hydraulic fluid in machines and equipment. It consists of a variety of hydraulic components such as valves, pumps, and accumulators that are connected to each other by channels and ports. Thanks to their modular design, Bosch Rexroth hydraulic control units can be easily configured to meet specific application requirements.
Rotational speed sensor, Plastic housing, DC NPN, 2-kanalig, Connector, Sensing range 1.7 mm
Rotational speed sensor, Plastic housing, DC NPN, 2-channel, Connector, Sensing range 1.7 mm
Rotational speed sensor, Plastic housing, DC NPN, 2-channel, Cable, Sensing range 1.7 mm
Rotational speed sensor, Plastic housing, DC NPN, 2-channel, Cable, Sensing range 1.7 mm
- MXH
- Narrow Width Precision Slide Table (Recirculating Bearings)
- MXH
- Narrow Width Precision Slide Table (Recirculating Bearings)
art. 10118664
| repeat accuracy | < 0,001 mm |
| activating force | 100 cN |
| mech. pre-run / overrun | - / 1,5 mm approx. |
| output circuit | break function (NC) mechanical |
| operating temperature | -20 ... +75 °C |
art. 10251043
| repeat accuracy | < 0,001 mm |
| activating force | 30 cN |
| mech. pre-run / overrun | - / 1,5 mm approx. |
| output circuit | break function (NC) mechanical |
| operating temperature | -20 ... +75 °C |
art. 10238646
| repeat accuracy | < 0,001 mm |
| activating force | 250 cN |
| mech. pre-run / overrun | 1 mm / 1 mm approx. |
| output circuit | break function (NC) mechanical |
| operating temperature | -20 ... +75 °C |
Baumer my com art. 10222682
| repeat accuracy | < 0,001 mm |
| activating force | 75 cN |
| mech. pre-run / overrun | - / 0,8 ... 1,5 mm approx. |
| output circuit | NPN make function (NO) |
| operating temperature | -20 ... +75 °C |