• Robust and wearless
• High protection through fully encapsulated electronics
• Large tolerances: axial В±3 mm, radial max. 2.2 mm
• Very compact dimensions
• Simple mounting, easy adaptation

HDmag MHGP 200 Encoders without bearings - incremental

• Sensor head with integrated FPGA signal processing / Magnetic sensing
• Robust and wearless
• Electronics is fully encapsulated, high protection
• Large tolerances: axial ±3 mm, radial max. 2.2 mm
• Very compact dimensions
• Simple mounting, easy adaptation
• Several mounting possibilities

MHGP 100 Encoders without bearings - incremental

• Axial tolerance: ±3 mm
• Radial tolerance: 0.1...2.2 mm
• Degree of protection: IP 67
• Operating temperature: -20...+85 °C
• Material: Housing - aluminum alloy, wheel - stainless steel

• MHL2
• Air Gripper
• Parallel Style
• Wide Opening

• MHL2
• Air Gripper
• Parallel Style
• Wide Opening

• MHL2
• Air Gripper
• Parallel Style
• Wide Opening

art. 10136428

• cable FEP, 2 m
• -40 ... 120 В°C

micrologic 2.3 400a

• Rated voltage: 400 V AC
• Frequency: 50/60 Hz
• Maximum switching capacity: 4000 А
• Maximum short-circuit current resistance: 50 kA
• Degree of protection: IP20

micromaster vector

Interfaces:

• Digital input/output
• Analog input/output
• RS-485
• Profibus DP

Baumer MIL10 linear incremental encoder without bearings

• Sensor head with magnetic tape
• Robust magnetic sensing method
• Output signals A 90° B with index signal
• Output circuits: HTL/push-pull and TTL/RS422
• Resolution up to 5 µm (4-times evaluation)
• Non-contact, wear-free sensing system
• High resistance to dirt and vibrations

MIR 3000F - HDmag flex

• HDmag flex MIR 3000F Encoders without bearings - incremental
• Sensor head with magnetic tape for shaft ø300...3185 mm
• Encoder without bearings - incremental with magnetic sensing
• Square-wave signals HTL/TTL or sine signals
• Max. 131072 pulses per revolution
• Status indication via system OK output and LED
• Fully encapsulated electronics IP 67

HDmag flex MIR 350A Encoders without bearings - incremental

• Sensor head with split wheel and magnetic tape for shaft ø90...300 mm
• Encoder without bearings - incremental with magnetic sensing
• Split wheel design for easiest mounting on installed shafts
• Very large axial tolerances ±8 mm
• Max. 131072 pulses per revolution
• Status indication via system OK output and LED
• Fully encapsulated electronics IP 67

mir10

• Reading method: Magnetic
• Short circuit protection: Yes
• Supply voltage: 10...30 VDC
• Reverse polarity protection: Yes

• MIS
• Escapement
• 1 Finger Type

• MIW
• Escapement
• 2 Finger Type

Cylinder sensor with GMR cell, Plastic housing for T-slot cylinders , DC PNP, ATEX approval, Group II, category 3D, Cable with connector, Magnetic sensitivity 2.8, Travel speed > 10

Cylinder sensor with GMR cell, Plastic housing for T-slot cylinders, DC PNP/NPN, Cable with connector, Magnetic sensitivity 2.8, Travel speed > 10

cylinder sensor with AMR cell, Plastic housing for T-slot cylinders, DC PNP, Cable, Magnetic sensitivity 2, Travel speed > 10

• Cylinder sensor with AMR cell
• Operating voltage 10...30 DC
• ("supply class 2" to cULus) V
• 3-wire
• PNP
• 0.3 m PUR-Cable
• M8 Connector
• 0.3 m
• PUR

• Cylinder sensor with AMR cell
• Operating voltage 10...30 DC
• ("supply class 2" to cULus) V
• 3-wire
• PNP
• 0.3 m PUR-Cable
• M12 Connector
• 0.3 m
• PUR

Cylinder sensor with GMR cell, Plastic housing for T-slot cylinders, DC PNP, Cable with connector, Magnetic sensitivity 1.5, Travel speed < 0.25

Cylinder sensor with GMR cell, Plastic housing for C-slot cylinders, DC PNP, Cable with connector, Magnetic sensitivity 2.8, Travel speed > 10

Cylinder sensor with GMR cell, Plastic housing for C-slot cylinders, DC PNP, Cable with connector, Magnetic sensitivity 2.8, Travel speed > 10

Cylinder sensor with GMR cell, Plastic housing for C-slot cylinders, DC PNP, Cable with connector, Magnetic sensitivity 2.8, Travel speed > 10

• Cylinder sensor with GMR cell
• Operating voltage 10...30 DC
• ("supply class 2" to cULus) V
• 3-wire
• PNP
• 0.5 m PUR-Cable
• M8 Connector
• 0.5 m
• PUR

Cylinder sensor with GMR cell, Plastic housing for C-slot cylinders, DC PNP, Cable with connector, Magnetic sensitivity 2.8, Travel speed > 10

Cylinder sensor with GMR cell, Plastic housing for C-slot cylinders, DC PNP, Cable with connector, Magnetic sensitivity 2.8, Travel speed > 10

Cylinder sensor with GMR cell, Plastic housing for C-slot cylinders, DC PNP, Cable with connector, Magnetic sensitivity 2.8, Travel speed > 10

Cylinder sensor with GMR cell, Plastic housing for C-slot cylinders, DC PNP, Cable with connector, Magnetic sensitivity 2.8, Travel speed > 10