• Non-contact level measurement up to 3.4 m operating distance / 8.0 m limit scanning distance
  • Pressure resistant up to 6 bar (87 psi)
  • Transducer protected by PVDF cover for increased resistance
  • Non-contact level measurement up to 3.4 m operating distance / 8.0 m limit scanning distance
  • Pressure resistant up to 6 bar (87 psi)
  • Transducer protected by PVDF cover for increased resistance

art.10234439

  • emitter
  • scanning range sd: 0 ... 700 mm
  • operating temperature: 0 ... +60 °C

Burkert water filter

  • Filtration rating: Micron level
  • Flow rate: Capacity of the filter


art. 10131013

special type2 point proximity switch
scanning range sd350 ... 2500 mm
scanning range far limit Sde350 ... 2500 mm
output circuitNPN make function (NO)
operating temperature-10 ... +60 °C

art. 10129063

special type2 point proximity switch
scanning range sd350 ... 2500 mm
scanning range far limit Sde350 ... 2500 mm
output circuitNPN make function (NO)
operating temperature-10 ... +60 °C
5/2 sol/sol pbmo 24v pin up

IN STOCK!

v1 w bk Pepperl Fuchs

  • Minimum insulation resistance: 100 MΩ
  • Operating temperature: -40 ... 85 °C
  • Tightening torque: 0.6 Nm

Digital positioner TZIDC

Pneumatic positioner V18345

  • Type 3 (IEC 61496), SIL2 (IEC 61508), PL d (EN ISO 13849)
  • Protective field size from 0.4 m x 0.4 m to 1.5 m x 1.5 m
  • Resolution 20 mm, 24 mm, and 30 mm

v3200

F4 Non-rising stem gate valve PN10

V430 Code Reader art. V4305326M

v5240

Bolted bonnet gate valve TRIM 8 - ANSI 150 / ISO PN20

v5241

Bolted bonnet gate valve TRIM 8 - ANSI 300 / ISO PN50

v60 5/2-spool valve
v61 5/2-spool valve
v61 5/2-spool valve
v61 5/2-spool valve
v62 5/2-spool valve
v62 5/3-spool valve

ifm vacuum sensor

  • Current consumption: < 20 mA
  • Connection type: Cable, M12 connector
  • Ambient temperature: -20°C ... +80°C
  • Relative humidity: ≤ 95% without condensation
  • Vibration: 20 g (10 ... 2000 Hz)
  • Impact: 50 g

Valve repair kit (Valve Rebuild Kit) from Burkert

The LC25A/B/E/D5X/6X/V004 Sealing and Repair Kits from Bosch Rexroth are versatile and convenient solutions for rehabilitating hydraulic systems. These kits contain all the necessary seals, gaskets and other parts needed to repair Bosch Rexroth hydraulic components. Kits are available in different configurations to meet different repair needs.

SOLENOID COIL OD02360730OC00-36-C4Z -20G24 02 is an electromagnetic coil used in hydraulic systems to control the direction of hydraulic fluid flow.

  • Rolling element bearing monitor
  • Spectral analysis
  • Envelope-curve FFT
  • Trend analysis
  • Connection via M12 x 1 and M8 x 1 connectors
  • Envelope-curve FFT
  • Trend analysis
  • Gateway and safety monitor in one housing

  • Connection to Ethernet Modbus TCP/IP

  • SafeLink

  • Integrated data decoupling

  • Gateway compliant with AS-Interface specification 3.0

  • Connection to PROFINET IO

  • Fault diagnosis via LEDs and grafic display

  • Easy commissioning by graphic display

  • art. 11165842
  • 640 x 480 px
  • OnsemiPYTHON300
  • 1/4" CMOS
  • 403 fps
  • Gigabit Ethernet