Solenoid valve
VIBRATION SENSOR
- Output frequency range: 0.1 - 400 Hz
- Output frequency resolution: 0.01Hz
Short-stroke cylinder in tube new design. Stainless steel piston rod. Fluid: filtered air (without or with lubrication)
Short-stroke cylinder in tube new design. Stainless steel piston rod. Fluid: filtered air (without or with lubrication)
Short-stroke cylinder in tube new design. Stainless steel piston rod. Fluid: filtered air (without or with lubrication)
Short-stroke cylinder
Short-stroke cylinder in tube new design. Stainless steel retracted piston rod. Fluid: filtered air (without or with lubrication)
art. W4S10007F
Omron w4s1 05d - Basic Switch
Short-stroke cylinder
IN STOCK!!!
788-312 Relay module
- Nominal supply voltage: 24 VDC
- Number of contacts: 2 switched contacts
- Maximum constant current: 8 A
- Color status indicator: red
- Module width: 15 mm
- Area: 2.50 mm²
- Color: gray
SHAFT WITH SUPPORT WM-50-AF1-H6X46 is a drive component used in industrial machinery and equipment. It consists of a shaft, bearing and housing and is designed to transmit torque and support the shaft.
WCS interface module
ANTIROTATING DEVICE from the Univer Group company
- 1-channel
- Installation in Zone 1, Zone 21, and Class I Div. 1
- WirelessHART Adapter
- Battery operated
- Also supplies field device
- Input 2-wire HART transmitters and 2-wire HART current sources
- Output WirelessHART wireless interface
- Direct mounting on HART or 4 mA ... 20 mA field device
- Rotatable antenna
- 1-channel
- WirelessHART Adapter
- Battery operated
- Also supplies field device
- Input 2-wire HART transmitters and 2-wire HART current sources
- Output WirelessHART wireless interface
- Direct mounting on HART or 4 mA ... 20 mA field device
- Rotatable antenna
- 1-channel
- Installation in Zone 1
- WirelessHART Adapter
- Battery operated
- Also supplies field device
- Input 2-wire HART transmitters and 2-wire HART current sources
- Output WirelessHART wireless interface
- Direct mounting on HART or 4 mA ... 20 mA field device
- Rotatable antenna
- Installation in Zone 1, 21
- Installation in Class I, II, Division 1
- Installation in Class III
- Ex d housing for Ex d field devices
- Cast aluminum housing
- Loop powered
- Direct mounting on HART or 4 mA ... 20 mA field device
- Encapsulated antenna
- Up to 8 field devices in multidrop
- MODBUS WirelessHART Gateway
- Graphical network analysis
- Simple and automatic configuration options
- Ethernet and RS 485 interface
- HART and MODBUS protocol via both interfaces
- Input WirelessHART wireless interface
- 24 V DC supply
- Redundant power supply connections
- EtherNet/IP WirelessHART Gateway
- Graphical network analysis
- Simple and automatic configuration options
- Ethernet and RS 485 interface
- HART protocol via both interfaces
- EtherNet/IP protocol via Ethernet interface
- Input WirelessHART wireless interface
- 24 V DC supply
- Redundant power supply connections
- 2-channel
- Installation in Zone 1
- WirelessHART converter
- Battery operated
- Thermocouple or RTD input
- Output WirelessHART wireless interface
- Internal antenna
- Laser protection class 1 or 2
- Autocollimation optics
- Rugged sensors for industrial use
- Laser protection class 1 or 2
- Autocollimation optics
- Rugged sensors for industrial use
- Laser protection class 1 or 2
- Autocollimation optics
- Rugged sensors for industrial use
- Laser protection class 1 or 2
- Autocollimation optics
- Rugged sensors for industrial use
- Classification: EX II 2G Ex ia op is IIC T4 according to Directive 94/9/EC (ATEX)
- Corresponds to Category 2G
- Output type: EN 60947-5-6 (NAMUR)
- Classification: EX II 2G Ex ia op is IIC T4 according to Directive 94/9/EC (ATEX)
- Corresponds to Category 2G
- Output type: EN 60947-5-6 (NAMUR)