Bosch Rexroth

3842993120

STRUT PROFILE 40X40L

bosch 3842999716

• Torque: 100 Nm
• Speed: up to 3000 rpm
• Connection dimensions: 8 mm x 12 mm
• Degree of protection: IP65
• Certificates: CE, RoHS

3we6a6x eg24n9k4

• Supply voltage: 24 V DC
• Current consumption: 2.4 A
• Trigger time: 25 ms
• Pressure relief: Internal
• Piston position in neutral state: Closed
• Connection: DIN 24340 A, ISO 4401-03-02-0-05, NFPA T3.5.1 R2-2002 D03
• Fluid type: Hydraulic oil H, ISO VG 32 - 46
• Liquid temperature: From -20°C to +80°C
• Filtration: 10 μm

4we 10 j5x eg24n9k4 m

• Liquid viscosity: 15 - 350 cSt at 40°C
• Body material: Aluminum
• Coil material: Class F
• Degree of protection: IP65

4we10d5x eg24n9k4 m

• Nominal current: 2.5 A
• Coil power: 60 W
• Trigger time: 25 ms
• Release time: 25 ms

4we6c6x eg24n9k4

• Pressure drop: 3 bar
• Internal leakage: 0.1 cm³/min
• External leakage: 0 drops/min

4we6j62

• Viscosity of the working fluid: 10-400 Pa·s
• Working fluid temperature: From -20°C to +80°C
• Filtration of the working fluid: Purity class ISO 6/4.5

4weh22 rexroth

• Type: Directional hydraulic distributor
• Working fluid temperature: -20°C to +80°C (-4°F to 176°F)
• Body material: aluminum

rexroth 4wrae

• Overlap: Internal
• Maximum hysteresis: ≤ 0.1%
• Maximum uncertainty zone: ≤ 0.05%
• Threshold sensitivity: ≤ 0.05%

4wree 6 rexroth

• Nominal voltage: 24 V DC
• Current consumption: max. 2.5 A
• Operating temperature range: from -20°C to +80°C
• Protection class: IP65

4wree 6 e16 2x g24k31 a1v

• Number of sections: 2
• Section type: 3/3 (two-way control)
• Valve position in neutral state: Closed
• Switching time: 25 ms
• Degree of accuracy: 2%
• Maximum switching frequency: 120 Hz

4wrpdh

• Type: Proportional hydraulic distributor with integrated digital axis controller (IAC)
• Series: 4WRPDH
• Sizes: 6, 10
• Maximum flow rate: 100 l/min (26.4 gal/min)
• Safety features: category 4/PL e according to EN 13849-1

4wrpeh 10 c4 b100l 2x g24k0 a1m

• Response time: < 20 ms
• Clearance: < 10 µm
• Feedback Type: LVDT (Linear Differential Alternating Current Transformer)
• Feedback range: ± 5 mm

4wrpeh 6 c3 b12l 2x g24k0 a1m

• Working fluid temperature: From -20°C to +80°C (-4°F to +176°F)
• Viscosity of working fluid: 10...100 mm²/s (32...320 cSt) at working temperature
• Maximum switching pressure: 210 bar (3045 psi)
• Trigger time: 20 ms
• Maximum switching frequency: 120 Hz

4wrpeh 6 c3 b24l 2x g24k0 a1m

• Maximum pressure: 400 bar
• Nominal consumption: 24 l/min
• Maximum consumption: 40 l/min
• Working fluid: Mineral oil HLP / DIN 51524

4wrse rexroth

• Response time: < 20 ms
• Hysteresis: < 1 %
• Body material: Aluminum
• Gasket material: FKM (for mineral oils) or FKM/FFKM (for phosphate esters)
• Degree of protection: IP67

4wrte rexroth

• Supply voltage: +24 V DC
• Current consumption: 250 mA
• Overcurrent protection: Yes
• Short circuit protection: Yes

4wrz rexroth

• Signal type: current or voltage
• Signal range: 4 - 20 mA or 0 - 10 V
• Response time: < 20 ms
• Switching frequency: up to 120 Hz

rexroth 4ws2em10

• Operating voltage range: 21-27 V DC
• Current consumption: 2 A
• Control signal frequency: 0-1000 Hz
• Control signal/displacement ratio: 5 µm/V
• Resistance: 10 kΩ

Rexroth hydraulic pump

4 cmі/rev, Clockwise rotation, Conical 1:5, Rectangular flange Dia. 80 mm, Square flange to fitting ISO 8434-1
HYDRAULIC GEAR PUMP AZPF-12-004RCB20KB

5.5 cmі/rev, Clockwise rotation, Conical 1:5, Rectangular flange Dia. 80 mm, Rectangular flange to fitting ISO 8434-3
HYDRAULIC GEAR PUMP AZPF-11-005RCB20MB

Gear Pump External

8 cmі/rev, Clockwise rotation, Conical 1:5, Rectangular flange Dia. 80 mm, Rectangular flange to fitting ISO 8434-2
HYDRAULIC GEAR PUMP AZPF-11-008RCB20MB

11 cmі/rev, Clockwise rotation, Conical 1:5, Rectangular flange Dia. 80 mm, Rectangular flange to fitting ISO 8434-4
HYDRAULIC GEAR PUMP AZPF-11-011RCB20MB

Gear Hydraulic

"14 cmі/rev, clockwise rotation, Conical 1:5, Rectangular flange Ш 36.47 mm (M8), Square flange (Italian version)"
HYDRAULIC GEAR PUMP AZPF-12-014RHO30KB

"14 cmі/rev, clockwise rotation, Conical 1:5, Front bearing Ш 80 mm type 2, Square flange DIN 3901/3902"
HYDRAULIC GEAR PUMP AZPF-10-014RSG20MB

510566001 Hydraulic Gear

11 cmі/rev + 1 cmі/rev , Rectangular flange Ш 80 mm, clockwise rotation, Conical 1:5, Square flange DIN 3901/3902, Metric thread to DIN 3852T1, Standard
HYDRAULIC GEAR PUMP AZPFB-11-011/1.0RCB2002MB

16 cmі/rev, Clockwise rotation, Conical 1:5, Rectangular flange Dia. 80 mm, Square flange to fitting ISO 8434-1
HYDRAULIC GEAR PUMP AZPF-11-016RCB20MB

510625055 External Gear

19 cmі/rev , Clockwise rotation, Conical 1:5, SAE J744 82-2 (A) 2-bolt flange, Square flange to fitting ISO 8434-1
HYDRAULIC GEAR PUMP AZPF-11-019RCR20KB

22.5 cmі/rev, Counter clockwise rotation, Conical 1:5, 2-bolt mounting Dia. 50 mm (K H D), Square flange to fitting ISO 8434-1
HYDRAULIC GEAR PUMP AZPF-12-022LCP20KB-S0007

Rexroth Hydraulic Gear Pump

"56 cmі/rev, clockwise rotation, Splined shaft SAE J744 22-4 (13T 16/32DP), SAE J744 101-2 (B), Rectangular flange SAE metric thread"
HYDRAULIC GEAR PUMP AZPG-22-056RDC07MB