Bosch Rexroth

rexroth od15061

• Working fluid temperature: From -20 °C to 80 °C
• Viscosity of the working fluid: From 15 to 380 mm²/s (cSt)
• Degree of protection: IP65

pgh4 rexroth

• Continuous working volume: Up to 80% of the maximum volume
• Minimum rotation frequency: 15 rpm
• Maximum rotation frequency: 3600 rpm (depending on the model)
• Noise level: Up to 70 dB(A) (depending on the model)
• Flow ripple: Up to 3% (depending on the model)

pgh5 rexroth

• Maximum pressure: 350 bar
• Maximum performance: 16 cm³/rev.
• Maximum rotation speed: 3600 rpm.

The PLUG-IN CONNECTOR 3P Z4L SW +10MSPEZ from Bosch Rexroth is a connector for connecting hydraulic valves. It is intended for use in hydraulic systems with an operating pressure of up to 350 bar and an operating temperature of -40°C to +100°C.

pr21 rexroth

• Built-in WLAN controller (optional)
• Built-in Bluetooth 4.0 (optional)
• TPM 2.0
• Watchdog timer

The Hydraulic Gear Pump SEAL KIT PV7-1X/16M from Bosch Rexroth is a seal kit designed for hydraulic gear pumps of the PV7-1X series, size 16M. These seals guarantee the tightness of the pump, preventing leakage of hydraulic fluid.

r036050000

• Screw type: ball bearing
• Nut type: preloaded
• Body material: aluminum
• Protection: IP65
• Operating temperature: from -20°C to +80°C

r044229401

• Bearing type: Ball bearing
• Number of bearings: 4
• Bearing material: steel
• Lubricant type: Lithium-based lubricant
• Maximum load: 200 N
• Static load: 400 N
• Friction moment: 0.15 Nm

MINIATURE GUIDE RAIL RESIST NRII MSA-012-SNS-H-MA-00

MINIATURE GUIDE RAIL RESIST NRII MSA-015-SNS-H-MA-00

Ball transfer units without felt seal – Size 8
KU-B8-OFK

Steel Ball Transfer

Ball transfer units without felt seal – Size 15
KU-B15-OFK

rexroth r053xx15xx

• Dynamic load capacity C [N]: 500
• Maximum permissible linear speed vmax [m/s]: 2

Ball Transfer

rexroth r053xx22xx

• Material: Steel
• Sealing: Rubber
• Temperature range: from -20°C to +100°C

Standard LB, closed, 12, with two seals
KBM-12-DD

Linear Bushing

Standard LB, closed, 16, with two seals
KBM-16-DD

Bushing

Standard LB, closed, 30, with two seals
KBM-30-DD

Standard LB, closed, 8, with two seals
KBM-8-DD

Flange LB, flange, tandem, 20, with two seals
KBMFT-20-DD

Linear set (aluminum), C-40, with two seals, greased
LSAC-40-DD-G

Linear set (aluminum), A-25, with two seals
LSA-A-25-DD

Wiper seal (torque), d = 12, closed
SEAL RING 12

Ball Nut

Single nut with flange FEM-E-B, size 20 x 10R x 3?-?4
FEM-E-B 20X10RX3-4

Single nut with flange FEM-E-S, size 20 x 20R x 3.5?-?2
FEM-E-S 20X20RX3.5-2

Single nut with flange FEM-E-S, size 25 x 10R x 3?-?4
FEM-E-S 25X10RX3-4

fem es R151234013

Single nut with flange FEM-E-S, size 32 x 10R x 3.969?-?5
FEM-E-S 32X10RX3.969-5

BALL GUIDE RAIL CARBON STEEL

Ball guide rail, SNS, size 15, steel CS, accuracy high
CARBON STEEL KSA-015-SNS-H-MA-AK

CAP COVER 30/35

• Plastic cap
• Suitable for roller/cam roller and ball rail systems
• Size = 30/35

Front seal - 25

Lubricating Unit R161922500

Front lube unit (KSF) - 25