Bosch Rexroth
Ball rail systems Acessories LWA 032 SKS FN E 0 from Bosch Rexroth are high-quality single-axis roller bearings designed for the needs of handling and automation technology.
The BALL SCREW 50X5RX3.5 (T9) from Bosch Rexroth is a precision screw mechanism designed for linear movements requiring high precision and efficiency. It is used in a variety of industries.
The miniature tolerance ring BN30X15 from Bosch Rexroth is a compact component used to support and center shafts in applications with limited space.
The Seal Kit CD250.200 125MA from Bosch Rexroth is a seal kit designed for hydraulic cylinders of the CD250 series with a piston diameter of 200 mm and a piston stroke of 125 mm. This seal kit is made of high quality materials, which ensures its resistance to wear, high pressure and chemical resistance.
The Seal Kit CDH.160 110M from Bosch Rexroth is a seal kit designed for use in the CDH series of hydraulic cylinders. This seal kit is made of high quality materials and is designed to provide reliable and long-lasting performance in the harshest conditions.
cdh2 rexroth
- Maximum speed: 0.3 m/s (0.98 ft/s)
- Working volume: up to 126.7 L (33.5 gal)
- Stem volume: up to 18.9 L (5 gal)
- Operating temperature: -20°C to +80°C (-4°F to +176°F)
cdm1 rexroth
- Type: Double acting hydraulic cylinder
- Maximum piston speed: up to 1 m/s
The Seal Kit CY210.063 045MXZY7667 from Bosch Rexroth is a set of seals designed for use in hydraulic systems. It is used to prevent fluid leakage from cylinders, motors and other components. The set consists of different types of seals made of different materials such as rubber, fluorine rubber, and polyurethane.
cdt3me5
- Storage temperature: from -40°C to +100°C
- Hydraulic oil ISO VG 32 - 46
- Accuracy class: ISO H2
cdt3mp5
- Type: Double acting hydraulic cylinder
- Manufacturer: Bosch Rexroth
- Series: CDT3MP5
- Test pressure: 240 bar (24 MPa)
- Working fluid temperature: From -20°C to +80°C
The CLAMPING ELEMENT HK 4505 KR from Bosch Rexroth is a solid manual clamping device designed for use with ball and roller guides. It features a simple, safe and compact design that allows for manual operation without additional power.
The CR KSA-055-SNS-H-MA-AK from Bosch Rexroth is a high-precision rail guide with a roller mechanism designed to provide reliable linear motion in a wide range of applications.
rexroth db
- Type: Pilot operated pressure relief valve
- Series: DB
- Connection: flanged, threaded, hinged
The DBDS 10 K1X/630 from Bosch Rexroth is a direct acting hydraulic safety valve with socket (hexagonal with protective cap) designed to protect hydraulic systems against overpressure.
The DBAW25BH2 2X 350 6EG24K4 is a hydraulic overload protection unit from Bosch Rexroth. It is used to protect hydraulic systems from damage caused by excessive pressure. The unit consists of two independent safety valves that are manually adjustable.
The DR6DP2-5X/25Y is a pressure reducing valve from Bosch Rexroth designed to reduce pressure in hydraulic systems. It is used in a wide range of applications, including industrial machinery, mobile machinery and construction equipment.
rexroth efc
- Ambient temperature: from -10°C to +45°C
- Altitude above sea level: up to 1000 m
- Relative humidity: up to 95% (non-condensing)
The ZEM-E-S 8X2.5RX1.588-3 from Bosch Rexroth is a high-precision ball screw designed for linear motion applications. This ZEM-ES cylindrical single nut block is a member of the Miniature series and is characterized by its nominal diameter and right-hand helix direction, which are integral to its performance.
rexroth hacd
- Maximum pressure: 350 bar
- Maximum volume flow: 60 l/min
- Static accuracy: ± 0.01 mm
- Reaction time per step: 10 ms
- Reaction time to the signal: 5 ms
- Overload capacity: 150% of the rated load for 5 seconds
The HAD0,16 250 1X 20Z06F 1N111 BA is a diaphragm hydraulic accumulator from Bosch Rexroth designed to absorb pressure fluctuations, vibrations and compensate for fluid volume in hydraulic systems.
rexroth hcs03
- Supply voltage: 3AC 400-500V
- Operating temperature range: From -20°C to +70°C
- Overload Capacity: 150% for 2 seconds
- Switching frequency: Up to 16 kHz
hm 20 2x 400 c k35
- Supply voltage: 18...30 V DC
- Current consumption: ≤ 12 mA
- Input resistance: ≥ 2 kΩ
- Output resistance: ≤ 100 Ohm
- Response time: ≤ 2 ms
- Protection: IP67
hm20 rexroth
- Nominal supply voltage: 12...35 V DC
- Current consumption: max. 20 mA
- Input resistance: max. 220 ohms
- Response time: < 2 ms
rexroth hmv01
- Type: Power supply unit
- Series: IndraDrive M
- Application: Servo drives
- Efficiency: Up to 95% (with energy recovery)
- Cooling: Internal air
The S8A50 1X 450J3 is a high performance industrial hydraulic seat valve designed to reliably shut off oil flow in selected ports. This check valve belongs to the X series of components and has the symbol A → B to indicate its configuration and performance.
SEAL KIT DF060/110/140P-FKM ART. NO. 311957 is a seal kit developed by Bosch Rexroth for use in hydraulic systems. It is designed to provide a tight seal and protect system components from leakage and contamination.
ikb0005
- Immunity to interference: According to IEC 61000-4-2 and IEC 61000-4-3
- Operating temperature range: From -20°C to +80°C
- Humidity: Up to 90% without condensation
- Degree of protection: IP50
The KBH 20 DD from Bosch Rexroth is a linear plain bearing with super-precision precision designed for highly loaded applications where maximum rigidity and smooth running are required. It is used in a wide variety of industries.
KBCs from Bosch Rexroth are compact linear bushings designed to provide smooth, precise and reliable linear motion in a wide range of applications.
The KBDR4 LR 25DD from Bosch Rexroth is a self-supporting, torsionally rigid linear bushing with an integrated cross bearing for high precision. It is designed for use with a single shaft and features four guide grooves for torque transmission as well as matching shaft profiles.