Pepperl+Fuchs K-System

• 1-channel isolated barrier

• 24 V DC supply (Power Rail)

SMART Transmitter Power Supply

• 1-channel signal conditioner

• 24 V DC supply (Power Rail)

• 2-channel signal conditioner

• 24 V DC supply (Power Rail)

• 1-channel isolated barrier

• 24 V DC supply (Power Rail)

• Input 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources

• 1-channel signal conditioner

• 24 V DC supply (Power Rail)

• Input for 2- or 3-wire sensors, NAMUR sensors or dry contacts

• 1-channel isolated barrier

• 24 V DC supply (Power Rail)

• Input for NAMUR sensors or dry contacts

• 2-channel signal conditioner
• 24 V DC supply (Power Rail)
• Dry contact or NAMUR inputs
• Input frequency 1 mHz ... 1 kHz
• Current output 0/4 mA ... 20 mA
• Relay contact and transistor output
• Start-up override
• Configurable by PACTware or keypad
• Line fault detection (LFD)

• 1-channel signal conditioner

• 24 V DC supply (Power Rail)

• Scaleable current or voltage input

• 2-channel signal conditioner
• 24 V DC supply (Power Rail)
• Thermocouple, RTD, potentiometer or voltage input
• Usable as signal splitter (1 input and 2 outputs)
• Voltage output 0/1 V ... 5 V
• Configurable by PACTware
• Line fault (LFD) and sensor burnout detection
• Up to SIL 2 acc. to IEC 61508/IEC 61511

• 1-channel isolated barrier

• 24 V DC supply (Power Rail)

• Thermocouple, RTD, potentiometer or voltage input

• 1-channel isolated barrier

• 24 V DC supply (Power Rail)

• 1-channel isolated barrier

• 24 V DC supply (Power Rail)

• Voltage input 0 V ... -20 V

• 1-channel signal conditioner
• 24 V DC supply (Power Rail)
• Strain gauge input (full or half bridge)
• Output 0 mA ... В± 20 mA or 0 V ... В± 10 V
• 2 relay contact outputs
• Programmable high/low alarm
• Configurable by PACTware or keypad
• RS-485 interface
• Line fault detection (LFD)

• 1-channel isolated barrier
• 24 V DC supply (Power Rail)
• Strain gauge input (full or half bridge)
• Output 0 mA ... В± 20 mA or 0 V ... В± 10 V
• 2 relay contact outputs
• Programmable high/low alarm
• Configurable by PACTware or keypad
• RS-485 interface
• Low response time
• Line fault detection (LFD)

• 1-channel signal conditioner
• Universal usage at different power supplies
• Thermocouple, RTD, potentiometer or voltage input
• Redundant TC input
• Current output 0/4 mA ... 20 mA
• 2 relay contact outputs
• Configurable by PACTware or keypad
• Line fault (LFD) and sensor burnout detection
• Up to SIL 2 acc. to IEC 61508/IEC 61511

• 1-channel signal conditioner
• Universal usage at different power supplies
• Input for 2- or 3-wire sensors, NAMUR sensors or dry contacts
• Input frequency 1 mHz ... 10 kHz
• Current output 0/4 mA ... 20 mA
• Relay contact and transistor output
• Start-up override
• Line fault detection (LFD)
• Up to SIL 2 acc. to IEC 61508/IEC 61511

• 1-channel signal conditioner
• Universal usage at different power supplies
• Input for 2- or 3-wire sensors, NAMUR sensors or dry contacts
• Input frequency 1 mHz ... 10 kHz
• Current output 0/4 mA ... 20 mA
• Relay contact and transistor output
• Start-up override
• Line fault detection (LFD)
• Up to SIL 2 acc. to IEC 61508/IEC 61511

• 2-channel signal conditioner
• Universal usage at different power supplies
• Dry contact or NAMUR inputs
• Input frequency 1 mHz ... 1 kHz
• Current output 0/4 mA ... 20 mA
• Relay contact and transistor output
• Start-up override
• Configurable by PACTware or keypad
• Line fault detection (LFD)

• 1-channel isolated barrier
• 24 V DC supply (Power Rail)
• Level sensing input
• Adjustable range 1 k Omega- ... 150 k Omega-
• Relay contact output
• Fault relay contact output
• Adjustable time delay up to 10 s
• Minimum/maximum control
• Line fault detection (LFD)

• 2-channel signal conditioner
• 24 V DC supply (Power Rail)
• Current output up to 700 Omega- load
• HART I/P and valve positioner
• Line fault detection (LFD)
• Accuracy 0.05 %
• Terminal blocks with test sockets
• Up to SIL 2 acc. to IEC 61508

• 2-channel isolated barrier
• 24 V DC supply (Power Rail)
• Dry contact or NAMUR inputs
• Usable as signal splitter (1 input and 2 outputs)
• 2 x 2 relay contact outputs with AND logic
• Line fault detection (LFD)
• Reversible mode of operation
• Up to SIL 2 acc. to IEC 61508

• 2-channel isolated barrier
• 24 V DC supply (Power Rail)
• Input 2-wire SMART transmitters
• Output 0/4 mA ... 20 mA current sink
• Terminal blocks with test sockets
• Up to SIL 2 acc. to IEC 61508

• 2-channel
• NAMUR sensor input
• Reduces field wiring by 50%
• Supports 2:1 technology

• 2-channel
• Dry contact input
• Reduces field wiring by 50%
• Supports 2:1 technology

• 1-channel
• Dry contact input
• For line fault detection (LFD)