Pilz

PSEN 1.1p-20/8mm/ 1 switch

• Actuation force: < 10 N
• Reset force: < 10 N
• Stroke: 8 mm
• Impact resistance: IK07
• Vibration resistance: according to DIN EN 60068-2-64

PSEN 1.1a-20 /8mm/5m/1switch

• Vibration resistance: up to 20 g
• Impact resistance: up to 50 g
• Body material: plastic
• Weight: 170 g

PSEN 1.2p-20/8mm/ 1 switch

• Current consumption: max. 100 mA
• Output current: max. 2 A
• Switching voltage: max. 250 V (AC/DC)
• Trigger time: < 10 ms
• Reset time: < 10 ms
• Reverse polarity protection: yes
• Short circuit protection: yes

PSEN cs1.1n / PSEN cs1.1 1 Unit

• Dimensions: 30 x 25 x 18 mm
• Installation type: Overhead
• Fixation: 2 x M4
• Body material: Polycarbonate (PC)
• Cover material: Polycarbonate (PC)

PSEN cs1.13p / PSEN cs1.1 / ATEX 1 Unit

• Sao = 15 mm
• Sar = 40 mm
• Complete set: 1 pc. coded switch with activator

PSEN b1

• Trigger time: < 20 ms
• Reset time: < 20 ms
• Maximum tightening torque: 20 Nm
• Permissible angle of rotation: ± 5°

PSEN cs1.1n 1switch

• Air humidity: 0% ... 95% (non-condensing)
• Vibration: according to DIN EN 60068-2-6
• Impact: according to DIN EN 60068-2-7

PSEN cs2.1p / PSEN cs2.1 1Unit

• Actuation force: < 10 N
• Trigger stroke: 8 mm
• Trigger range: 15 mm
• Supply voltage: 24 V DC
• Current consumption: < 100 mA
• Trigger time: < 20 ms
• Reset time: < 100ms
• Maximum switching frequency: 10 Hz

PSEN cs2.1p 1 switch

• Body: Aluminum, anodized
• Connector: M12, 8-pin
• Degree of protection: IP67
• Vibration resistance: EN 60068-2-6
• Impact resistance: EN 60068-2-7

PSEN cs2.2p / PSEN cs2.1 1 Unit

• Operating temperature range: -25°C - 70°C
• Standard storage temperature: -40°C - 85°C
• Degree of protection: IP67
• Drive type: PSEN cs2.1
• The possibility of close installation: Yes
• Connection type: M12, 8-pin connector

PSEN cable axial M12 8-pole 30m

• Nominal voltage: 24 V DC
• Nominal current: 2 A
• Maximum current: 4 A
• Insulation resistance: > 10 MΩ
• Electrical strength: 2500 V AC

PSEN cable M12-8sf, 20m

• Insulation resistance: > 10 MΩ at 500 V DC. current
• Capacitance: < 10 pF/m
• Inductance: < 1 μH/m
• Characteristic resistance: 50 ohms

PSEN cs1.19n 1 switch

• Installation: wall/DIN-rail
• Working position: any
• Tilt range: ± 15°
• Certificates: TÜV, CE, CCC

PSEN cs3.1a /PSEN cs3.1 1unit

• Trigger distance: 10 mm (max.)
• Change in operating distance with temperature: ±0.01 mm/°C
• Trigger time: < 20 ms
• Reset time: < 100ms
• Switching frequency: max. 1000 Hz
• Reliability: > 10^9 actuation cycles

PSEN cs3.1b /PSEN cs3.1 1unit

• Cable bending radius: 5 x Ø
• Drive type: PSEN cs3.1
• The possibility of close installation: Yes
• Connection type: 10 m cable
• Cable lines: Li9Y11Y 8 x 0.14 mm²
• Body material: PBT

PSEN cs3.1 M12/8-1.5m/PSEN cs3.1 1unit

• Operating voltage range: 20.4 V DC - 28.8 V DC
• Maximum current consumption: 150 mA
• Trigger time: < 10 ms
• Reset time: < 10 ms
• Switching frequency: < 10 Hz
• Electrical strength: 2000 V AC/DC
• Insulation resistance: > 20 MΩ

 PSEN cs3.1b 1 switch

• Current consumption: ≤ 100 mA
• Output current: ≤ 2 A
• Output activation time: ≤ 10 ms
• Output reset time: ≤ 10ms

PSEN cs3.1 M12/8-1.5m 1switch

• Supply voltage: 24 V DC (+/- 10%)
• Current consumption: max. 100 mA
• Output: 2x OSSD (Safety Solid State Output)
• Switching range: depending on the drive, serial connection
• Activation time: max. 10 ms
• Reset time: max. 5 ms
• Short circuit protection: yes
• Reverse polarity protection: yes

PSEN cs4.1n / PSEN cs4.1 1 Unit

• Overvoltage category: III
• Degree of contamination: Clean
• Creep: 3
• Type of protection, housing: IP67
• Bending radius (when laying): K15 x Ø
• Drive: PSEN cs4.1
• The ability to install the sensor close to each other: Yes (please pay attention to the installation instructions)
• Connection type: M12, 5-pin socket

PSEN cs4.1 M12/8-0.15m/PSEN cs4.1 1Unit

• Maximum current: 2 A
• Switching voltage: 24 V DC
• Switching current: 2 A
• Trigger time: < 10 ms
• Reset time: < 10 ms
• Switching frequency: max. 1000 Hz
• Electrical strength: 2500 V (RMS)

PSEN cs4.1n 1switch

• Body material: PBT
• Impact resistance: IK07
• Vibration: 10 g, 10 - 500 Hz
• Degree of pollution: 3
• Installation: Wall or panel
• Fastening type: 2 x M4

PSEN cs4.1 M12/8-0.15m 1switch

• Type of protection, housing: IP67
• Bending radius (when laying): K15 x Ø
• The ability to install the sensor close to each other: Yes (please pay attention to the installation instructions)
• Connection type: M12, 8-pin socket
• Cable lines: Li9Y11Y 8 x 0.14 mm2
• Body material: PBT

PSEN cs4.1p 1switch

• Trigger time: < 10 ms
• Reset time: < 10 ms
• Supply voltage: 24 V DC (+/- 10%)
• Power consumption: 1 W
• Input current: 40 mA
• Output current: 200 mA
• OSSD output voltage: 18 V DC
• OSSD output current: 200 mA
• OSSD delay time: 0.5ms
• OSSD reset time: 10ms

PSEN cs4.2n / PSEN cs4.1 1 Unit

• Type of protection, housing: IP67
• Bending radius (when laying): K15 x Ø
• Drive type 1: PSEN cs4.1
• The ability to install the sensor close to each other: Yes (please pay attention to the installation instructions)
• Connection type: M12, 5-pin socket
• Cable lines: Li9Y11Y 8 x 0.14 mm2
• Body material: PBT

PSEN cs4.2n 1switch

• Type of protection, housing: IP67
• Bending radius (when laying): K15 x Ø
• The sensor can be installed close to: Yes, Montagehinweis beachten
• Connection type: M12, 5-pin socket
• Cable lines: Li9Y11Y 8 x 0.14 mm2
• Upper body material: PBT

PSEN cs4.2 M12/8-0.15m 1switch

• Cable bending radius: 15 x cable Ø
• Close fitting: Yes
• Connection type: M12, 8-pin socket
• Cable: Li9Y11Y 8 x 0.14 mm2
• Body material: PBT

PSEN cs4.2p 1switch

• Trigger force: max. 15 N
• Body: Aluminum
• Contact group: Gold-plated brass
• Sealing: EPDM

PSEN cs3.19n 1 switch

• Bending radius (when laying): K15 x Ø
• Drive type: PSEN cs3.19
• Possible to install the sensor in close proximity: Yes, Montagehinweis beachten
• Connection type: M12, 5-pin socket
• Cable lines: Li9Y11Y 8 x 0.14 mm2
• Body material: PBT

PSEN cs5.11 M12/8/PSEN cs5.11 M12 1unit

• Trigger range: 11 mm (with the activator in the square position)
• Travel margin: 8 mm (Sao)
• Residual stroke: 20 mm (Sar)
• Actuation force: < 5 N
• Trigger frequency: up to 50 Hz
• Vibration level: 10 g at 10 - 500 Hz
• Degree of impact: 30 g at 11 ms

PSEN me1M / 1AR

• Body material: Metal (usually stainless steel)
• Installation: On the surface
• Temperature range: Depends on the modification, but usually from -25°C to +70°C
• Vibration resistance: High
• Noise: Low level