Pilz
PSEN ml b 1.1 unit
- Bend radius (when laying) K1: 5 x Ø
- Escape release available: No
- Type: 1 actuator PSEN ml 1.1
- Connection type: M12, 8-pin male
PSEN ml b 1.1 switch
- Number of OSSD outputs 2
- Number of sig. outputs 1
- Potential isolation S/C O No
- S/C output short circuit proof Yes
- Utilisation cat. to EN 60947-1 DC-13
PSEN ml b 2.1 unit
- Operating Temperature: 0 to 60°C
- Storage Temperature: According to EN 60068-2-1/-2
- Humidity: 93% relative humidity at 40°C
- EMC: Compliant with EN 55011, EN 60947-5-3, and EN 61326-3-1
PSEN ml b 2.1 switch
- Operating temperature: 0 to 60°C
- Storage temperature: According to EN 60068-2-1/-2
- Humidity: 93% r.h. at 40°C
- Vibration and shock: Compliant with EN 60068-2-6, 130g shock
PSEN ml s 1.1 unit
- Principle of operation: Transponder
- ISO 14119 Coding Level: Low
- Classification according to EN 60947-5-3: PDDB
- Transponder encoding type: Encoded
- Reset Type: Power Reset
- Possibility of serial connection: Yes
PSEN ml escape release
- Built-in position sensor
- Ability to connect to external devices
- Diagnostic functions
PSEN sl-0.5p 2.1 / PSEN sl-0.5 1unit
- Electrical connection: 8-pin M12 connector
- Holding force: 500 N
- Material of the actuator: Stainless steel
- Degree of protection of the actuator: IP67
- Number of outputs: 2
PSEN sl-0.5p 2.2 / PSEN sl-0.5 1unit
- Product type: Magnetic safety gate system
- Assured release distance: 8.0 mm
- Certifications: CE, cULus Listed, EAC (Eurasian), TÜV
- Dimensions: 45 mm x 122 mm x 44 mm
PSEN sl-0.5n 1.1 / PSEN sl-0.5 1unit
- Inputs: 1
- Outputs: 2 OSSD outputs
- Short circuit proof: Yes
- Utilization category: DC-12
- Ambient temperature: -25 to 55 °C
- Storage temperature: -25 to 70 °C
PSEN sl-0.5p 2.1 1switch
- S/C output short circuit proof: Yes
- Utilisation cat. to EN 60947-1: DC-12
- Ambient temperature standard: EN 60068-2-14
- Ambient temperature: -25 - 55 °C
- Storage temperature standard: EN 60068-2-1/-2
- Climatic suitability standard: EN 60068-2-78
- Humidity rating: 93 % r. h. at 40 °C
PSEN sl-0.5p 1.1 / PSEN sl-0.5fm 1unit
- Protection type: IP67
- Holding force: 500 N
- Max. vertical offset: 5 mm
- Max. angular offset: 2.5 degrees
- Ambient temperature: -25 to 55 °C
- Humidity: 93% RH at 40 °C
PSEN sl-0.5p 3.1 / PSEN sl-0.5 1unit
- Safety level: SIL3/PL e/Cat4
- Sensor principle: Transponder
- Coding level: ISO 14119
- Classification: EN 60947-5-3
- Transponder coding: Coded
- Suitable for series connection: Yes
- Sensor can be flush-mounted: Yes (with installation note)
- Cable lines: LiYY 8 x 0.25 mm²
- Housing material: PBT
PSEN sl-1.0p 1.1 / PSEN sl-1.0 1unit
- Type: Safety locking device
- Model: PSEN sl-1.0p 1.1 / PSEN sl-1.0 1unit
- Function: Electromagnetic guard locking
- Coding: Coded
- Actuator: Standard
- Holding force: 1000 N
PSEN sl-1.0p 1.1 1switch
- Actuator types: PSEN sl-1.0 1.1 (Type 1), PSEN sl-1.0fm 1.1 (Type 2)
- Flush mounting: Yes, with mounting instructions
- Connection type: M12, 8-pin male
- Cable: LiYY 8 x 0.25 mm²
- Housing material: PBT (upper part), anticorodal, hard anodized (base plate)
PSEN sl-1.0p 1.1 VA 1switch
- Holding force magnet on: 1000 N
- Max. vertical offset: 5 mm
- Max. angular offset: 2.5 deg
- Type 1 actuator: PSEN sl-1.0 VA
- Sensor can be flush-mounted: Yes, observe mounting instructions
- Connection type: M12, 8-pin male
- Cable lines: LiYY 8 x 0.25 mm²
- Housing material upper part: PBT
- Material of base plate: Stainless steel 1.4301
PSEN sg2c-3LPE unit
- Power Supply: 24 VDC
- Outputs: Safe outputs (OSSD) for controlling actuators
- Inputs: Inputs for safety sensors (light curtains, pressure mats, etc.)
- Enclosure Rating: IP54
- Temperature Range: -20°C to +55°C
PSEN sg2 actuator
- Ambient temperature: -20 to 55 °C (standard EN 60068-2-14)
- Storage temperature: standard EN 60068-2-1/-2
- Climatic suitability: standard EN 60068-2-78
PSEN op2S-1-1
- Operating temperature: from -25°C to +55°C.
- Climatic resistance: complies with the EN 60068-2-3 standard.
- Air humidity: up to 95% relative humidity at a temperature of 40°C.
- Vibration resistance: complies with EN 60068-2-6.
- Impact resistance: withstands an impact load of up to 30g.
PSEN op4S-1-2
- Supply voltage: 10 ... 30 VDC
- Current consumption: max. 150 mA
- Output signal: PNP or NPN selectable
- Switching capacity: max. 200 mA
- Voltage drop: max. 2 V
- Reverse polarity protection: Yes
- Short-circuit protection: Yes
PSEN op2H-s-30-060/1
- Operating temperature: 0 - 55 °C
- Relative humidity: 95% at 40 °C
- Condensation: Not allowed
PSEN op4F-s-14-030/1
- Operating temperature: 0 - 55 °C
- Relative humidity: 95% at 40 °C
- Condensation: not allowed
- Degree of protection: IP67 (according to the EN 60529 standard)
- Vibration resistance: according to EN 60068-2-6
- Impact resistance: 10g as standard
PSEN op4H-s-30-060/1
- Relative humidity: 95% at 40 °C
- Condensation: Not allowed
- Vibration resistance: Meets EN 60068-2-6 standard
- Impact resistance: 10g
PSEN op4H-s-30-090/1
- Supply voltage: 24 V DC
- Protection type, housing: IP67
- Application in accordance with: CLC/TS 61496-2; EN 61496-1
- Ambient temperature: 0 - 55 °C
PSEN op4H-s-30-120/1
- Number of OSSD Outputs: 2
- Climatic Suitability Standard: EN 60068-2-3
- Humidity Rating: 95 % r.h. at 40 °C
- Condensation Permitted: No
PSEN op4H-s-30-150/1
- Humidity rating: 95 % r.h. at 40 °C
- Condensation permitted: No
- Vibration to standard: EN 60068-2-6
- Shock resistance: 10g
- Protection type standard: EN 60529
- Protection type, housing: [Missing information]
- Reaction time: 25 ms
PSEN op4B-4-120/1
- Ambient temperature: -10 to 55 °C
- Relative humidity: 95% at 50 °C
- Condensation: not allowed
- Vibration: according to EN 60068-2-6
- Impact resistance: 10g
- Degree of protection against dust and moisture: 2
- Degree of protection according to the standard: EN 60529
PSEN sc L 5.5 08-12
- Protection type, housing: IP65
- Supply voltage (V): 24 - 24 V DC
- Power consumption DC: 8 W
- Used wavelength range: 905 nm
PNOZ s6
Operating temperature: -10 °C ... +55 °C
Storage temperature: -25 °C ... +70 °C
Relative humidity: 30% ... 95% (non-condensing)
PNOZ s6.1 24VDC 3 n/o 1 n/c
- The range of permissible switching frequency: 0 Hz ... 50 Hz
- Electrical strength: 2500 В
- Power consumption: max. 4.5 W
PNOZ s22 24VDC 2 x 3 n/o 1 n/c
- Application category: DC13/AC15 according to EN 60947-5-1
- Operating temperature range: from -10 °C to +55 °C
- Degree of protection: IP67