Pepperl+Fuchs NEB12-18GM50-E1-V1 Inductive sensor

Pepperl+Fuchs NEB12-18GM50-E1-V1
Item Number: NEB12-18GM50-E1-V1
Series: Cylindrical type, Housing diameter: 18 mm, Housing material: brass, nickel-plated, Rated operating distance: 12 mm, Connection type: Device connector M12 x 1 , 4-pin, Output type: 3-wire, Installation: virtually flush, Type of voltage: DC
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
General specifications
Switching element functionNPN NC
Rated operating distance12 mm
Installationquasi flush
Output polarityDC
Assured operating distance0 ... 9.72 mm
Actuating elementmild steel, e. g. 1.0037, SR235JR (formerly St37-2)
36 mm x 36 mm x 1 mm
Reduction factor rAl 0.26
Reduction factor rCu 0.2
Reduction factor r304 0.63
Reduction factor rBrass 0.33
Nominal ratings
Installation conditions
Ain steel 1.0037 (St37): 4 mm
B14 mm
C36 mm
F36 mm
Operating voltage10 ... 30 V
Switching frequency0 ... 500 Hz
Hysteresis0.12 ... 1.8 mm
Reverse polarity protectionyes
Short-circuit protectionpulsing
Overload resistanceyes
Wire breakage protectionyes
Inductive overvoltage protectionyes
Surge suppressionyes
Ripple10 %
Voltage dropless than or equal to 2 V
Repeat accuracy0.6 mm
Operating current0 ... 200 mA
Off-state currentless than or equal to 10 mA
No-load supply currentless than or equal to 11 mA
Switching state indicatorLED, yellow
Functional safety related parameters
MTTFd2650 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated less than or equal to 36 V
Ambient conditions
Ambient temperature-25 ... 85 °C (-13 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typeConnector M12 x 1 , 4-pin
Housing materialbrass, nickel-plated
Sensing facePBT
Housing diameter18 mm
Degree of protectionIP67
Mass50 g

Comments

No comments yet

Write a comment

in international format without spaces
All fields are required