Pepperl+Fuchs NJ2-11-N-G-Y10326 Inductive sensor

Pepperl+Fuchs NJ2-11-N-G-Y10326
Item Number: NJ2-11-N-G-Y10326
  • Comfort series
124.60
Quantity
-
+
Total price: 124.60
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
CE marking[*PD-Z02585A*]
CE marking[*PD-Z02585A*]
Effective internal inductancemax. 50 µH ; a cable length of 10 m is considered.
Rated operating distance2 mm
ATEX marking II 1D Ex ia IIIC T135В°C Da
The Ex-related marking can also be printed on the enclosed label.
MTTFd5887 a
Output type2-wire
Appropriate typeNJ 2-11-N-G...
Reduction factor rAl 0.4
Core cross-section0.34 mm2
Nominal voltage8 V
StandardsEN 60079-0:2012+A11:2013, EN 60079-11:2012
Ignition protection ""Intrinsic safety""
Use is restricted to the following stated conditions
UL approvalcULus Listed, General Purpose
Installationflush
Diagnostic Coverage (DC)0 %
Output typeNAMUR
ATEX marking II 2G Ex ia IIC T6…T1 Gb
The Ex-related marking can also be printed on the enclosed label.
Housing materialStainless steel 1.4305 / AISI 303
Actual operating distance1.8 ... 2.2 mm
Sensing facePVDF
Connection typecable PUR , 2 m
Reduction factor rCu 0.3
Switching frequency0 ... 3000 Hz
Degree of protectionIP68
Switching functionNormally closed (NC)
Use in the hazardous areasee instruction manuals
Effective internal capacitancemax. 30 µF
A cable length of 10 m is considered.
Reduction factor r304 0.85
Appropriate typeNJ 2-11-N-G...
Effective internal capacitancemax. 30 nF ; a cable length of 10 m is considered.
Assured operating distance0 ... 1.62 mm
Effective internal inductancemax. 50 µH
A cable length of 10 m is considered.
Maximum permissible ambient temperatureDetails of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EU-type examination certificate.
Mission Time (TM)20 a
Hysteresis0.5 ... 3.5 typ. 2 %
Ambient temperature-25 ... 100 В°C (-13 ... 212 В°F)
StandardsEN 60079-0:2012+A11:2013, EN 60079-11:2012
Ignition protection ""Intrinsic safety""
Use is restricted to the following stated conditions

Comments

No comments yet

Write a comment