Pepperl+Fuchs NMB5-18GM65-E2-NFE-V1 Inductive sensor

Pepperl+Fuchs NMB5-18GM65-E2-NFE-V1
Item Number: NMB5-18GM65-E2-NFE-V1
Series: Cylindrical type, Housing diameter: 18 mm, Housing material: Stainless steel 1.4305 / AISI 303, Rated operating distance: 5 mm, Connection type: V1 connector (M12 x 1), 4-pin, Output type: 3-wire, Installation: flush, Type of voltage: DC
Total price: 197.40
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
General specifications
Switching element functionPNP NO
Rated operating distance5 mm
Output polarityDC
Assured operating distance0 ... 4.05 mm
Actuating elementNonferrous targets
Reduction factor rAl 1
Reduction factor rCu 1.1
Reduction factor r304 0
Reduction factor r316Ti 0
Reduction factor rSt37 0
Reduction factor rBrass 0.9
Nominal ratings
Operating voltage10 ... 30 V DC
Switching frequency30 Hz
Hysteresis3 ... 15 typ. 5 %
Reverse polarity protectionyes
Short-circuit protectionyes
Voltage dropless than or equal to 2 V
Operating currentless than or equal to 200 mA
Current consumption< 14 mA
Off-state currentless than or equal to 10 mA
Indicators/operating means
Operation indicator4-way dual LED
Green: power
Yellow: output
Approvals and certificates
UL approvalcULus Listed, General Purpose
CSA approvalcCSAus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated less than or equal to 36 V
Ambient conditions
Ambient temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Connection typeV1 connector (M12 x 1), 4-pin
Housing materialStainless steel 1.4305 / AISI 303
Sensing faceStainless steel 1.4305 / AISI 303
Housing diameter18 mm
Degree of protectionIP67 / IP68 / IP69K - cordset dependent according to cable specification


No comments yet

Write a comment