Pepperl+Fuchs NSN4-12GM50-2E2-M1-S2D2 Inductive sensor

Pepperl+Fuchs NSN4-12GM50-2E2-M1-S2D2
Item Number: NSN4-12GM50-2E2-M1-S2D2
  • No unusable area
  • 4 mm non-flush
  • Use of standard metallic actuating surfaces
  • Applications up to Cat. 2, PLd/SIL 2 possible (can be used redundantly up to Cat. 3, PLe/SIL 3)
  • LED for switching state and fault indication
  • Safety outputs OSSD
  • TГњV certified
  • E1-Type approval
  • Extended temperature range
    -40 ... +85 В°C
126.00
Quantity
-
+
Total price: 126.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
CategoryCat. 2
Switching state indicatorLED, yellow
Off-state current0 ... 0.5 mA
Error indicatorLED, red
Temperature drift≤ 10 %
below - 25В°C ≤ 20%
Reduction factor rAl 0.55
Reverse polarity protectionreverse polarity protected
Sensing facePBT
Rated operating voltage24 V
Output typePNP
Reduction factor rBrass 0.6
Housing materialbrass, nickel-plated
Assured release distance of a PDDB6 mm
Core cross-section0.5 mm2
Scope of delivery2 self locking nuts in scope of delivery
Switching function2 x normally open (NO)
Operating current1 ... 30 mA per output
Switching frequency0 ... 30 Hz
E1 Type approval10R-04
Short-circuit protectionpulsing
Ambient temperature-40 ... 85 В°C (-40 ... 185 В°F)
No-load supply current≤ 15 mA
Overload resistanceyes
UL approvalcULus Listed, General Purpose, Class 2 Power Source
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Diagnostic Coverage (DC)min. 60 %
Safety Integrity Level (SIL)SIL 2
Operating voltage18 ... 30 V
Output type4-wire
Reduction factor r304 0.9
CCC approvalCCC approval / marking not required for products rated ≤36 V
Rated operating distance4 mm
Performance level (PL)PL d
Reduction factor rCu 0.5
Time delay before availability≤ 300 ms
MTTFd> 7500 a
Rated insulation voltage30 V
Actuating elementReference target according EN IEC 60947-5-2 (FE360 - ST37K)
12 mm x 12 mm x 1 mm
Degree of protectionIP68 / IP69
Mass91 g
Hysteresistyp. 5%
Altitude≤ 2000 m above MSL
Connection typecable PUR , 2 m
Output polarityDC
Assured operating distance0 ... 3.24 mm
Voltage drop≤ 3 V
Mission Time (TM)20 a
Installationnon-flush

Comments

No comments yet

Write a comment