Pepperl+Fuchs NSN4-12GM50-2E2-PUR-S2D2 Inductive sensor

Pepperl+Fuchs NSN4-12GM50-2E2-PUR-S2D2
Item Number: NSN4-12GM50-2E2-PUR-S2D2
  • No unusable area
  • 4 mm non-flush
  • Use of standard metallic actuating surfaces
  • Applications up to Cat. 2, PLd/SIL 2 possible (can be used redundantly up to Cat. 3, PLe/SIL 3)
  • LED for switching state and fault indication
  • Safety outputs OSSD
  • TГњV certified
108.50
Quantity
-
+
Total price: 108.50
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
CCC approvalCCC approval / marking not required for products rated ≤36 V
Installationnon-flush
Rated insulation voltage30 V
Short-circuit protectionpulsing
Operating voltage18 ... 30 V
Overload resistanceyes
Voltage drop≤ 3 V
Operating current1 ... 30 mA per output
Time delay before availability≤ 300 ms
Degree of protectionIP68 / IP69
Hysteresistyp. 5%
Error indicatorLED, red
Switching frequency0 ... 30 Hz
Switching function2 x normally open (NO)
Output type4-wire
Core cross-section0.34 mm2
Altitude≤ 2000 m above MSL
Assured release distance of a PDDB6 mm
Output polarityDC
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Mass77 g
Ambient temperature-25 ... 70 В°C (-13 ... 158 В°F)
Scope of delivery2 self locking nuts in scope of delivery
UL approvalcULus Listed, General Purpose, Class 2 Power Source
Diagnostic Coverage (DC)min. 60 %
Performance level (PL)PL d
Output typePNP
CategoryCat. 2
Assured operating distance0 ... 3.24 mm
Mission Time (TM)20 a
Off-state current0 ... 0.5 mA
Housing materialbrass, nickel-plated
Rated operating voltage24 V
Connection typecable PUR , 2 m
Reduction factor rAl 0.55
Rated operating distance4 mm
MTTFd> 7500 a
Actuating elementReference target according EN IEC 60947-5-2 (FE360 - ST37K)
12 mm x 12 mm x 1 mm
Reduction factor rBrass 0.6
No-load supply current≤ 15 mA
Switching state indicatorLED, yellow
Sensing facePBT
Reduction factor r304 0.9
Reduction factor rCu 0.5
Reverse polarity protectionreverse polarity protected
Safety Integrity Level (SIL)SIL 2

Comments

No comments yet

Write a comment