Pepperl+Fuchs NSN8-18GH50-2E2-M1-S2D2 Inductive sensor

Pepperl+Fuchs NSN8-18GH50-2E2-M1-S2D2
Item Number: NSN8-18GH50-2E2-M1-S2D2
  • No unusable area
  • 8 mm non-flush
  • Use of standard metallic actuating surfaces
  • Applications up to Cat. 2, PLd/SIL 2 possible (can be used redundantly up to Cat. 3, PLe/SIL 3)
  • LED for switching state and fault indication
  • Safety outputs OSSD
  • E1-Type approval
  • Extended temperature range
    -40 ... +85 В°C
  • TГњV certified
149.10
Quantity
-
+
Total price: 149.10
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Reduction factor r304 0.85
Overload resistanceyes
Switching frequency0 ... 30 Hz
Performance level (PL)PL d
Output typePNP
Connection typecable PUR , 2 m
Scope of deliverySupplied with 2 nuts
Mass107 g
Reverse polarity protectionreverse polarity protected
CategoryCat. 2
Operating voltage18 ... 30 V
Ambient temperature-40 ... 85 В°C (-40 ... 185 В°F)
No-load supply current≤ 15 mA
Diagnostic Coverage (DC)min. 60 %
UL approvalcULus Listed, General Purpose, Class 2 Power Source
Operating current1 ... 30 mA per output
Output type4-wire
Sensing facePBT
Reduction factor rAl 0.5
Hysteresistyp. 5%
Switching state indicatorLED, yellow
Rated insulation voltage30 V
Housing materialstainless steel 1.4404 / AISI 316L
Altitude≤ 2000 m above MSL
Degree of protectionIP68 / IP69
CCC approvalCCC approval / marking not required for products rated ≤36 V
Output polarityDC
Time delay before availability≤ 300 ms
Core cross-section0.5 mm2
Error indicatorLED, red
E1 Type approval10R-04
Rated operating voltage24 V
Safety Integrity Level (SIL)SIL 2
Switching function2 x normally open (NO)
Rated operating distance8 mm
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Mission Time (TM)20 a
Assured operating distance0 ... 6.48 mm
Installationnon-flush
Reduction factor rBrass 0.55
MTTFd> 7500 a
Off-state current0 ... 0.5 mA
Assured release distance of a PDDB12 mm
Short-circuit protectionpulsing
Actuating elementReference target according EN IEC 60947-5-2 (FE360 - ST37K)
24 mm x 24 mm x 1 mm
Reduction factor rCu 0.5
Voltage drop≤ 3 V

Comments

No comments yet

Write a comment