GBA2W is a solid shaft encoder available 

• Detection method: Optical
• Resolution: Maximum 19 bits
• Flange: Clamp or synchronous
• Initialization time: Typically 20 ms after power on
• Optional incremental output: Available on request
• Zero point adjustment: Electronic
• Input of counting direction: Yes

GBAMS

• Measurement method: Optical
• Power supply voltage: 10...30 VDC
• Size (flange): ø58 mm
• Diagnostic function: Position or parameter error

GBM2H

• High resolution encoder multiturn / SSI
• Optical sensing method
• Resolution: singleturn 18 bit, multiturn 12 bit
• Through hollow shaft up to ø14 mm
• High reliability by self-diagnostics
• Counting direction input

GBMMW

• Encoder multiturn / bus cover
• Optical sensing method
• Total resolution up to 31 bit
• High resistance to shock and vibrations

GCA cable sensor

• Cable diameter: 0.8 mm
• Pulling force: ≤11 Н
• Retraction force: >3 Н
• Linearity: ±0.02 %

ge244

• Size (flange): Ø58 mm
• Shaft type: Ø10 mm solid shaft
• Flange: Clamping flange
• Protection: EN 60529 IP 67

ge355

• Size (flange): ø58 mm
• Shaft type: ø10 mm solid shaft (clamping flange)
• Permissible load on the shaft: ≤20 N axial, ≤40 N radial
• Flange: Clamping flange

ge404

• Size (flange): ø58 mm.
• Shaft type: ø10 mm solid shaft.
• Flange: Clamping flange.
• Protection EN 60529: IP 67.
• Supply voltage: 10...30 V DC.

GEMMH

• Reading method: Optical
• Resolution:
• Single revolution: 13 bits
• Multi-turn: 16 bits
• Hollow shaft diameter: up to 14 mm
• Interfaces: CANopen®, EtherNet/IP, Profibus-DP, PROFINET
• Resistance to magnetic fields
• Self-diagnosis: High reliability thanks to self-diagnosis

Baumer GEMMW

• Solid shaft with clamping or synchro flange, stainless steel housing
• Optical sensing method
• Resolution: singleturn 13 bit, multiturn 16 bit
• CANopen®, Profibus-DP
• Material: stainless steel 1.4305

Fail-safe inductive sensor, Metal thread, M18 x 1, DC, M12 connector

Fail-safe inductive sensor, Metal thread, M18 x 1, DC, M12 connector

gh 180

The SINAMICS PERFECT HARMONY GH180 can be used with various types of AC motors, such as

• Asynchronous motors
• Synchronous motors
• Permanent magnet motors

GI341

• Blind or through hollow shaft up to ø15 mm
• Max. 2048 pulses per revolution
• Optical sensing method
• Flange and housing made of high-tech plastics
• Tangential cable output

GI342

• Encoder with blind or through hollow shaft ø10...15 mm
• Max. 2048 pulses per revolution
• Optical sensing method
• Flange and housing made of high-tech plastics

GI352

• Size (flange): ø58 mm
• Shaft type: ø10...15 mm (through hollow shaft)
• Protection according to EN 60529: IP 54
• Operating speed: ≤6000 rpm

GI356 incremental encoder - converts rotational motion into electronic signals for speed and position estimation.

• Size (flange): ø58 mm
• Shaft type: ø6 mm solid shaft
• Reading method: Optical

 Baumer GI357

• Encoder with solid shaft ø10 mm or ø6 mm
• Max. 5000 pulses per revolution
• Optical sensing method
• Clamping or synchro flange
• High rotation speed up to 10000 rpm

Fail-safe inductive sensor, Metal thread, M30 x 1.5, DC, M12 connector

Fail-safe inductive sensor, Metal thread, M30 x 1.5, DC, M12 connector

Fail-safe inductive sensor, Metal thread, M30 x 1.5, DC PNP, M12 connector

Gear motor

univer gl6140

• Body: aluminum, brass, stainless steel
• Seals: NBR, FKM, EPDM
• Spring: stainless steel

Baumer gm400

• Size (flange): Ø58 mm
• Shaft type: Ø10 mm solid shaft
• Flange: Clamping flange

gm401

• Technical data - mechanical design
• Size (flange): ø58 mm
• Shaft type: ø6 mm solid shaft
• Flange: Synchronous flange
• Reading method: Optical
• Code: Gray or binary