HMG 161

• Reading method: Optical
• Size (flange): ø160 mm
• Power supply voltage: 9...30 VDC
• Function: Multiturn

• Incremental encoder (optionally programmable)
• HTL/TTL output driver for cable length up to 350 m
• Very high resistance to shock and vibrations
• Two-sided insulated bearing system with hybrid bearings
• Special protection against corrosion CX (C5-M)
• Large terminal box, turn by 180В°
• Support plate for torque arm 360В° freely positionable
• Mounting compatible with HOG10 encoders
• Function display via LEDs

• Magnetic sensing method
• Function display via LEDs
• Multiturn sensing with Energy Harvesting technology "MicroGen", without gear or battery
• Two-sided bearing system with hybrid bearings
• Special protection against corrosion CX (C5-M)

Omron screen

• Ambient temperature: from -20°C to +60°C
• Humidity: 0% to 95% (non-condensing)
• Vibration: 0.5 g (from 57 to 250 Hz)
• Impact: 10 g (11 ms)

hmigto4310

• Screen size: 7.5 inches
• Resolution: 640 x 480 pixels (VGA)
• Power supply: 24 V DC
• Memory: 96 MB EPROM

rexroth hmv01

• Type: Power supply unit
• Series: IndraDrive M
• Application: Servo drives
• Efficiency: Up to 95% (with energy recovery)
• Cooling: Internal air

Incremental encoderHOG 10 

• TTL output driver for cable length up to 550 m
• HTL output driver for cable length up to 350 m
• Very high resistance to shock and vibrations
• Hybrid bearing for extended service life
• Large terminal box, turn by 180° or axial terminal cover

HOG 10 + DSL.E

• Programming via included software (RS485 interface)
• Logic level HTL or TTL
• 512…2500 pulses per revolution
• Blind hollow shaft ø16 mm

HOG 10+ DSL.R

• Logic level HTL or TTL
• 512…2500 pulses per revolution
• Blind hollow shaft ø16 mm
• DSL.R: 3 outputs speed controlled (independent transistor outputs)

Baumer HOG 10 + FSL

• TTL output driver for cable length up to 550 m
• Mechanical speed monitoring based on centrifugal force
• Hybrid bearing for extended service life
• Terminal boxes, turn by 180°

Incremental encoders - combination HOG 10 + FSL

• Encoder with integrated centrifugal switch
• TTL output driver for cable length up to 550 m
• Hybrid bearing for extended service life
• Terminal boxes, turn by 180°

art. 11151403

HOG 10 G Incremental encoders - combination

• Twin encoder with two electrically separated systems
• TTL output driver for cable length up to 550 m
• Hybrid bearing for extended service life
• Large terminal boxes, turn by 180°

hog 100

• High resolution
• Blind hollow shaft ø16 mm or cone shaft ø17 mm (1:10)
• Optical sensing method
• Output stage HTL or TTL
• Output stage with regulator 9...30 VDC
• Hybrid bearing for extended service life
• Large terminal box, turn by 180° or axial terminal cover

HOG 11

• Blind hollow shaft or cone shaft
• Offshore and salt water firm, high protection IP 67
• TTL output driver for cable length up to 550 m

HOG 11 + ESL 90

• Offshore and salt water firm, high protection IP 67
• TTL output driver for cable length up to 550 m
• Electronic speed monitoring
• Circuit breaker with one selectable threshold speed
• Hybrid bearing for extended service life
• Terminal boxes, turn by 180°

Baumer HOG 11 G

• Offshore and salt water firm, high protection IP 67
• TTL output driver for cable length up to 550 m
• Hybrid bearing for extended service life
• Large terminal boxes, turn by 180°

 Baumer HOG 14

• Through hollow shaft up to ø75 mm
• Optical sensing method
• Output stage HTL or TTL
• Output stage TTL with regulator UB 9...26 VDC

 Baumer HOG 16

• Through hollow shaft ø20...38 mm
• Output stage HTL, TTL or TTL with regulator UB 9...26 VDC
• Large terminal box, turn by 180°

HOG 161

• Through hollow shaft ø38...75 mm
• Output stage HTL or TTL
• Output stage TTL with regulator UB 9...26 VDC
• Large terminal box, turn by 180°

 Baumer HOG 163

• Through hollow shaft ø38...75 mm
• Optical sensing method
• Output stage HTL or TTL
• Output stage TTL with regulator UB 9...26 VDC
• Large terminal box, turn by 180°

 HOG 163 DN 1024 I 

• Through hollow shaft ø75 mm, 1024 pulses per revolution
• Optical sensing method
• HTL output driver for cable length up to 350 m
• Large terminal box, turn by 180° with cable 1 m and M23 connector

Baumer HOG 165 + DSL.E

• Programming via included software (RS485 interface)
• Logic level TTL or HTL
• 512...4096 pulses per revolution
• Through hollow shaft ø25 mm
• DSL.R: 3 outputs speed controlled (independent transistor outputs)
• DSL.E: 2 outputs speed controlled and 1 control output

hog 22

• Optical sensing method
• Robust light-metal housing
• Output stage HTL or TTL
• Output stage TTL with regulator UB 9...26 VDC
• Large terminal box, turn by 180°

HOG 220 Incremental encoders

• Through hollow shaft ø80...115 mm
• Robust light-metal housing
• Output stage HTL or TTL
• Output stage TTL with regulator UB 9...26 VDC

HOG 28

• Through hollow shaft ø120...150 mm
• Optical sensing method
• Output stage HTL or TTL
• Output stage TTL with regulator UB 9...26 VDC
• Large terminal box, turn by 180°

art. 11076784

Baumer HOG 75

• Through hollow shaft ø12...26 mm
• Optical sensing method
• Compact, robust aluminium housing
• Inside connecting terminals
• Output stage HTL or TTL
• Output stage TTL with regulator UB 9...26 VDC

Baumer HOG 8

• Through hollow shaft ø10...16 mm
• Output stage HTL or TTL
• Output stage TTL with regulator UB 9...26 VDC