Baumer Absolute encoders

GBA2W is a solid shaft encoder available 

• Detection method: Optical
• Resolution: Maximum 19 bits
• Flange: Clamp or synchronous
• Initialization time: Typically 20 ms after power on
• Optional incremental output: Available on request
• Zero point adjustment: Electronic
• Input of counting direction: Yes

GBAMS

• Measurement method: Optical
• Power supply voltage: 10...30 VDC
• Size (flange): ø58 mm
• Diagnostic function: Position or parameter error

GBM2H

• High resolution encoder multiturn / SSI
• Optical sensing method
• Resolution: singleturn 18 bit, multiturn 12 bit
• Through hollow shaft up to ø14 mm
• High reliability by self-diagnostics
• Counting direction input

GBMMW

• Encoder multiturn / bus cover
• Optical sensing method
• Total resolution up to 31 bit
• High resistance to shock and vibrations

ge244

• Size (flange): Ø58 mm
• Shaft type: Ø10 mm solid shaft
• Flange: Clamping flange
• Protection: EN 60529 IP 67

ge404

• Size (flange): ø58 mm.
• Shaft type: ø10 mm solid shaft.
• Flange: Clamping flange.
• Protection EN 60529: IP 67.
• Supply voltage: 10...30 V DC.

GEMMH

• Reading method: Optical
• Resolution:
• Single revolution: 13 bits
• Multi-turn: 16 bits
• Hollow shaft diameter: up to 14 mm
• Interfaces: CANopen®, EtherNet/IP, Profibus-DP, PROFINET
• Resistance to magnetic fields
• Self-diagnosis: High reliability thanks to self-diagnosis

Baumer GEMMW

• Solid shaft with clamping or synchro flange, stainless steel housing
• Optical sensing method
• Resolution: singleturn 13 bit, multiturn 16 bit
• CANopen®, Profibus-DP
• Material: stainless steel 1.4305

Baumer gm400

• Size (flange): Ø58 mm
• Shaft type: Ø10 mm solid shaft
• Flange: Clamping flange

gm401

• Technical data - mechanical design
• Size (flange): ø58 mm
• Shaft type: ø6 mm solid shaft
• Flange: Synchronous flange
• Reading method: Optical
• Code: Gray or binary

GXM2S is a high-resolution absolute encoder

• Optical sensing method
• Resolution: singleturn 14 bit, multiturn 12 bit
• Blind hollow shaft ø12...ø15 mm
• Electronic setting of zero point
• Counting direction input

Baumer GXM7W - RS485

• Optical sensing method
• Resolution: singleturn 13 bit, multiturn 12 bit
• Clamping or synchro flange
• Up to 4 bus users

gxmms

• Size (flange): ø58 mm  
• Relative humidity: 95 % non-condensing
• Resistance: EN 60068-2-6
• Code: Binary
• Code sequence: CW/CCW programmable

baumer gxmms

• Encoder multiturn / bus cover
• Optical sensing method
• Resolution: singleturn 13 bit, multiturn 16 bit
• Blind hollow shaft ø12...ø15 mm
• High resistance to shock and vibrations
• CANopen®, EtherCAT, EtherNet/IP, SAEJ1939, PROFINET, Profibus, SSI
• Code continuity check optional by bus
• Two incremental tracks A and B
• Maximum resistant against magnetic fields

baumer gxmmw

• Size (flange): ø58 mm
• Shaft type: ø10mm solid shaft (clamping flange), ø6mm solid shaft (synchronized flange)
• Flange: Clamping or synchronous flange
• Function: Multi-turn

GXMMW + incremental

• Size (flange): Ø58 mm.
• Code: Binary.
• Code sequence: CW/CCW programmable.
• Initial acceleration: ≤1000 U/s².

Absolute Optical Encoder GXMMW A203EA2 

• Encoder multiturn / bus cover
• Optical sensing method
• Resolution: singleturn 13 bit, multiturn 16 bit
• Clamping or synchro flange

GXMMW A203P32

• Voltage supply 10...30 VDC
• Reverse polarity protection Yes
• Consumption w/o load ≤100 mA (24 VDC)
• Operating temperature -25...+85 °C
• -40...+85 °C (optional)

GXMMW.0203P33

• Resolution: singleturn 13 bit, multiturn 16 bit
• Clamping or synchro flange
• Interface: Profibus-DP
• Code continuity check optional by bus
• Maximum resistant against magnetic fields

gxmmw.a203p33

Shaft diameter: 10 mm
Type of mounting: Clamping flange
Moment of inertia: 2.5e-7 kgm^2
Maximum acceleration speed: 10000 rpm^2
Response time: 1 μs
Power supply voltage: 10...30 V DC
Output signal: SSI, Profibus-DP, CANopen, EtherCAT

Baumer GXP1W - parallel

• Solid shaft with clamping or synchro flange
• Encoder multiturn / parallel
• Optical sensing method
• Resolution: singleturn 12 bit, multiturn 12 bit
• RS232 encoder programming interface

Baumer GXP5S - CANopen®

• Encoder multiturn / CANopen®
• Optical sensing method
• Resolution: singleturn 13 bit, multiturn 16 bit
• Blind hollow shaft ø12...ø15 mm
• LED status indicator

GXP5W - CANopen®

• Solid shaft with clamping or synchro flange
• Encoder multiturn / CANopen®
• Optical sensing method
• Resolution: singleturn 13 bit, multiturn 16 bit
• Clamping or synchro flange
• CANopen® Profile CIA DSP 406 / DSP 417 Lift

Baumer GXP6H - Interbus

• Size (flange): ø58 mm
• Shaft type: ø14 mm hollow shaft

Baumer GXP6W - Interbus

• Size (flange): ø58 mm
• Shaft type: ø14 mm hollow shaft

HMG 11

• Multiturn / SSI / Profibus / CANopen® / DeviceNet / PROFINET
• Optical sensing method
• Singleturn 13 bit, multiturn 12 bit / 16 bit
• Blind or through hollow shaft or cone shaft ø16...20 mm

HMG 161

• Reading method: Optical
• Size (flange): ø160 mm
• Power supply voltage: 9...30 VDC
• Function: Multiturn

• Magnetic sensing method
• Function display via LEDs
• Multiturn sensing with Energy Harvesting technology "MicroGen", without gear or battery
• Two-sided bearing system with hybrid bearings
• Special protection against corrosion CX (C5-M)

MHAD 50 - HDmag

• Absolute encoder, 1 or 2 sensing head
• Absolute encoder with magnetic sensing and without bearings
• Absolute resolution max. 16 bit singleturn
• Protection IP 67
• Large tolerances: axial ±1 mm, radial max. 1 mm

MHAP 100 - HDmag

• Absolute encoder 
• Singleturn 8...17 Bit 
• Magnetic sensing 
• Through hollow shaft max. diam 80 mm