Bosch Rexroth Hydraulics

cdm1 rexroth

• Type: Double acting hydraulic cylinder
• Maximum piston speed: up to 1 m/s

The Seal Kit CY210.063 045MXZY7667 from Bosch Rexroth is a set of seals designed for use in hydraulic systems. It is used to prevent fluid leakage from cylinders, motors and other components. The set consists of different types of seals made of different materials such as rubber, fluorine rubber, and polyurethane.

cdt3me5

• Storage temperature: from -40°C to +100°C
• Hydraulic oil ISO VG 32 - 46
• Accuracy class: ISO H2

cdt3mp5

• Type: Double acting hydraulic cylinder
• Manufacturer: Bosch Rexroth
• Series: CDT3MP5
• Test pressure: 240 bar (24 MPa)
• Working fluid temperature: From -20°C to +80°C

rexroth efc

• Ambient temperature: from -10°C to +45°C
• Altitude above sea level: up to 1000 m
• Relative humidity: up to 95% (non-condensing)

rexroth hacd

• Maximum pressure: 350 bar
• Maximum volume flow: 60 l/min
• Static accuracy: ± 0.01 mm
• Reaction time per step: 10 ms
• Reaction time to the signal: 5 ms
• Overload capacity: 150% of the rated load for 5 seconds

The HAD0,16 250 1X 20Z06F 1N111 BA is a diaphragm hydraulic accumulator from Bosch Rexroth designed to absorb pressure fluctuations, vibrations and compensate for fluid volume in hydraulic systems.

rexroth hcs03

• Supply voltage: 3AC 400-500V
• Operating temperature range: From -20°C to +70°C
• Overload Capacity: 150% for 2 seconds
• Switching frequency: Up to 16 kHz

hm 20 2x 400 c k35

• Supply voltage: 18...30 V DC
• Current consumption: ≤ 12 mA
• Input resistance: ≥ 2 kΩ
• Output resistance: ≤ 100 Ohm
• Response time: ≤ 2 ms
• Protection: IP67

SEAL KIT DF060/110/140P-FKM ART. NO. 311957 is a seal kit developed by Bosch Rexroth for use in hydraulic systems. It is designed to provide a tight seal and protect system components from leakage and contamination.

ms2n03

• Supply voltage: 24 V DC
• Power consumption: from 30 to 150 W
• Max. current: from 2.5 to 12.5 A
• Switching frequency: 16 kHz
• Insulation class: F

ms2n06

• Nominal body temperature: 120°C
• Cooling method: natural or forced
• Maximum power: up to 12 kW
• Maximum speed: up to 8000 rpm

A Bosch Rexroth hydraulic control unit is a modular component used to control the flow and pressure of hydraulic fluid in machines and equipment. It consists of a variety of hydraulic components such as valves, pumps, and accumulators that are connected to each other by channels and ports. Thanks to their modular design, Bosch Rexroth hydraulic control units can be easily configured to meet specific application requirements.

nfd03 1 rexroth

• Maximum short-circuit current: 10 kA
• Power factor: 0.95
• Operating temperature range: from -20°C to +50°C
• Storage temperature range: from -40°C to +70°C

rexroth nfd03 1 480

• Maximum current: 66 A
• Short-term current: 1000 A (5 s)
• Power loss: 120 W
• Power factor: 0.98
• Operating temperature range: -20°C to +55°C

pgh4 rexroth

• Continuous working volume: Up to 80% of the maximum volume
• Minimum rotation frequency: 15 rpm
• Maximum rotation frequency: 3600 rpm (depending on the model)
• Noise level: Up to 70 dB(A) (depending on the model)
• Flow ripple: Up to 3% (depending on the model)

pgh5 rexroth

• Maximum pressure: 350 bar
• Maximum performance: 16 cm³/rev.
• Maximum rotation speed: 3600 rpm.

The PLUG-IN CONNECTOR 3P Z4L SW +10MSPEZ from Bosch Rexroth is a connector for connecting hydraulic valves. It is intended for use in hydraulic systems with an operating pressure of up to 350 bar and an operating temperature of -40°C to +100°C.

pr21 rexroth

• Built-in WLAN controller (optional)
• Built-in Bluetooth 4.0 (optional)
• TPM 2.0
• Watchdog timer

The Hydraulic Gear Pump SEAL KIT PV7-1X/16M from Bosch Rexroth is a seal kit designed for hydraulic gear pumps of the PV7-1X series, size 16M. These seals guarantee the tightness of the pump, preventing leakage of hydraulic fluid.

r979017249

• Operating temperature: -20°C ... +80°C
• Noise level: 70 dB (A) at nominal speed of rotation
• Protection class: IP65

rexroth a10vo100

• Filtering level: ISO 11/16
• Tank volume: 2 l
• Maximum overload pressure: 400 bar

rexroth a11

• Noise level: 70-80 dB
• Temperature of working fluid: -40°C to +100°C
• Viscosity of working fluid: 10-300 cSt
• Filtration: 10-20 microns

rexroth a15vso

• Working fluid temperature: From -40°C to +130°C
• Protection: IP6K9K
• Certificates: CE, ATEX

rexroth a17fo

• Nominal pressure: 350 bar
• Maximum pressure: 400 bar

a2fm56

• Fluid type: mineral oil, synthetic oil, water-based fluids
• Liquid viscosity: from 15 to 300 cSt
• Operating temperature: from -40°C to +100°C
• Type of sealing: NBR, FKM, HNBR

rexroth a2fo

• Fluid: mineral oil, HFD (only for sizes 250...1000 in combination with bearing L), HFB-, HFC hydraulic fluid
• Direction of rotation: left or right

cdh1 rexroth

• Type: Double action
• Body: Aluminum
• Stem: Steel with hard chrome coating

cdt3 rexroth

Rod diameter: From 12 to 140 mm.
Piston speed: Up to 0.5 m/s.
Operating temperature: From -20°C to +80°C.
Fluid: HLP or HVO mineral oil.

ms2n07

• Rated voltage: 48 to 480 V DC
• Rated current: 3.2 to 40 A
• Cooling type: self-cooling