Bosch Rexroth Hydraulics

Choose a subcategory:
Show all categories

a10vo rexroth

  • Fluid: mineral or synthetic oil, non-flammable liquids
  • Fluid temperature: -40°C to +100°C
  • Liquid viscosity: from 15 to 350 cSt
  • Liquid filtration level: up to 10 microns

rexroth a10vso

  • Oil temperature: -40°C to +100°C
  • Oil viscosity: 14 to 320 cSt at 40°C
  • Noise level: up to 70 dB(A)

rexroth a11vo

  • Fluid type: hydraulic oil
  • Viscosity class: ISO VG 32 ... 68
  • Operating temperature: -20°C ... +80°C
  • Storage temperature: -40°C ... +100°C

 bosch rexroth a2fm

  • Type of actuation: Motor
  • Size (displacement) [cm³]: 180
  • Series: 61
  • Direction of rotation: alternating
  • Sealing material: FKM

rexroth a4vso

  • Noise level: up to 70 dB(A)
  • Working fluid temperature: -20°C to +80°C
  • Type of working fluid: mineral oil, synthetic oil, biodegradable oil

bosch cs351

  • Case material: Aluminum
  • Operating temperature: -10°C to +50°C
  • Degree of protection: IP54

rexroth efc3610

  • Voltage range: -15% to +10% of the nominal
  • Rated frequency: 50 Hz
  • EFFICIENCY: > 95%
  • Ambient temperature: -10°C to +40°C
  • Degree of protection: IP20

bosch rexroth efc 5610

  • Rated voltage: 380-480 V AC (+/- 10%,-15%)
  • Rated frequency: 50/60 Hz (+/- 5%)
  • Operating frequency range: 0.5-400 Hz
  • Maximum current: 1.5 - 380 A (depending on the model)
  • Power factor: > 0.99 (at rated load)


bosch rexroth hcs01

  • Type: Single-axis servo drive
  • Protection class: IP20
  • Cooling: Natural or forced air


hnc100 rexroth

  • Cycle time: 1 ms
  • Positioning speed: up to 600 mm/s
  • Acceleration: up to 20 m/s²

rexroth it21

  • Trigger time: from 20 to 50 ms
  • Noise level: up to 70 dB(A)
  • Degree of protection: IP67

bosch rexroth r1605

  • Dynamic load capacity: up to 15 kN
  • Allowable wear: up to 0.02 mm/m

xm22 rexroth

Interfaces

  • 2 x Ethernet 1.0 Gbit/s
  • 2 x USB 2.0
  • 1 x SD card slot
  • 1 x diagnostic LED indicator
  • 1 x controller bus connector XA-BS01 (for IndraControl S20 I/O modules)
  • 1 x XA-BS02 controller bus connector (for XFE01-1-FB-xx expansion modules)


SHAFT SEALING RING 30X17X7-SL-NBR-82

SEAL KIT AZPF-1X-NBR

Round connector
PIN TERMINAL 932460100
"22.5 cmі/rev, clockwise rotation, Conical 1:5, Rectangular flange Ш 80 mm, Square flange DIN 3901/3902"
HYDRAULIC GEAR PUMP AZPF-22-022RCB20MB
22.5 cmі/rev, Clockwise rotation, Conical 1:5 for flange A, Outrigger bearing Dia. 80 mm type 2, Square flange to fitting ISO 8434-1
HYDRAULIC GEAR PUMP AZPF-22-022RSG20PB-S0012
11 cmі/rev + 4 cmі/rev , Rectangular flange Ш 80 mm, clockwise rotation, Conical 1:5, Square flange DIN 3901/3902, Square flange DIN 3901/3902, Flow control valve residual flow, int.
HYDRAULIC GEAR PUMP AZPFF-11-011/004RCB2020MB

Diaphragm accumulator size 0.16 liters, 250 bar for mobile and industrial applications
HAD0,16-250-1X/50Z06F-1N111-BA

Diaphragm accumulator size 0.7 liters, 180 bar for mobile and industrial applications
HAD0,7-180-1X/50Z06A-1N111-BA
Diaphragm accumulator size 0.7 liters, 250 bar for mobile and industrial applications
HAD0,7-250-1X/80Z06A-1N111-BA
Diaphragm accumulator size 1.4 liters, 140 bar for mobile and industrial applications
HAD1,4-140-1X/20Z06C-1N111-CE
Diaphragm accumulator size 1.4 liters, 140 bar for mobile and industrial applications
HAD1,4-140-1X/30Z06C-1N111-CE
Diaphragm accumulator size 2.8 liters, 70 bar for mobile and industrial applications
HAD2,8-70-1X/20Z08C-1N111-CE

Valve amplifier for proportional valves with 1 solenoid without position feedback
VT-SSPA1-508-2X/V0/0

PLUG-IN CONNECTOR 3P Z45 B GDM201 BG...
Card holder for card amplifier
PCB HOLDER VT3002-1-2X/48F
Mating connector, connector 7-pole (6 + PE) EN 175301-804
PLUG-IN CONNECTOR 7P Z31 BF6-3PG11KSPEZ
Mating connector, connector 3-pole (2 + PE)
PLUG-IN CONNECTOR 4P G4W1F PG7 SW