Bosch Rexroth Hydraulics

pr21 rexroth

• Built-in WLAN controller (optional)
• Built-in Bluetooth 4.0 (optional)
• TPM 2.0
• Watchdog timer

The Hydraulic Gear Pump SEAL KIT PV7-1X/16M from Bosch Rexroth is a seal kit designed for hydraulic gear pumps of the PV7-1X series, size 16M. These seals guarantee the tightness of the pump, preventing leakage of hydraulic fluid.

r979017249

• Operating temperature: -20°C ... +80°C
• Noise level: 70 dB (A) at nominal speed of rotation
• Protection class: IP65

rexroth a10vo100

• Filtering level: ISO 11/16
• Tank volume: 2 l
• Maximum overload pressure: 400 bar

rexroth a11

• Noise level: 70-80 dB
• Temperature of working fluid: -40°C to +100°C
• Viscosity of working fluid: 10-300 cSt
• Filtration: 10-20 microns

rexroth a15vso

• Working fluid temperature: From -40°C to +130°C
• Protection: IP6K9K
• Certificates: CE, ATEX

rexroth a17fo

• Nominal pressure: 350 bar
• Maximum pressure: 400 bar

a2fm56

• Fluid type: mineral oil, synthetic oil, water-based fluids
• Liquid viscosity: from 15 to 300 cSt
• Operating temperature: from -40°C to +100°C
• Type of sealing: NBR, FKM, HNBR

rexroth a2fo

• Fluid: mineral oil, HFD (only for sizes 250...1000 in combination with bearing L), HFB-, HFC hydraulic fluid
• Direction of rotation: left or right

cdh1 rexroth

• Type: Double action
• Body: Aluminum
• Stem: Steel with hard chrome coating

rexroth cdt3

• Rod diameter: From 12 to 140 mm.
• Piston speed: Up to 0.5 m/s.
• Operating temperature: From -20°C to +80°C.
• Fluid: HLP or HVO mineral oil.

ms2n07

• Rated voltage: 48 to 480 V DC
• Rated current: 3.2 to 40 A
• Cooling type: self-cooling

r900580381

• Minimum performance: 2.5 cm³/rev
• Maximum volume: 10 cm³/volume
• Nominal performance: 8 cm³/rev
• Volumetric efficiency: 90%
• Mechanical efficiency: 85%
• Ripple: 2%
• Noise level: 68 dB(A)

r900580382

• Maximum volume flow: 60 l/min
• Nominal volume flow: 40 l/min
• Minimum volume flow: 5 l/min
• Nominal pressure: 180 bar
• Efficiency: 90%

r900999t31 Rexroth Hydraulic Cylinder

• Elevation speed: 0.1 m/s
• Volume of the working chamber: 0.22 l
• Stem volume: 0.04 l
• Operating temperature: from -20°C to +80°C
• Fluid type: Hydraulic oil ISO VG 32
• Viscosity: from 20 to 100 cSt (at 40°C)

r901048962

• Type: Hydraulic oil
• Viscosity class: VG 32 - VG 68
• Temperature: -40°C to +100°C
• Inlet: SAE 1/2"
• Outlet: SAE 3/4"
• Noise level: 70 dB
• Protection class: IP65

r901090799

• Sealing: NBR (butadiene-nitrile rubber) or EPDM (ethylene-propylene-diene rubber)
• Temperature of the working environment: From -20°C to +80°C
• Viscosity of the working fluid: From 15 to 350 cSt (mm²/s)

r902602657

• Solenoid type: Proportional
• Control type: Electric
• Connector type: DIN 43650
• Body material: Aluminum
• Core material: Steel

r902603442

• Vibration resistance: Up to 10 g
• Impact resistance: Up to 50 g
• Certification: CE, RoHS

r911296724

• DC bus voltage: 700 V DC
• Nominal network frequency: 50-60 Hz
• Power factor: 0.98

r911339573

• Frequency: 50/60 Hz
• Power factor: 0.95
• Voltage regulation: ±1%
• Voltage ripple: <2%

r925412023

• Drain pressure: 10 bar
• Drain volume: 20 l/min
• Maximum pressure in the case: 10 bar
• Maximum pressure in the tank: 10 bar

r934000451

• Switching frequency: 10 Hz
• Operating temperature: from -20°C to +55°C
• Overvoltage resistance: 1.5 x rated current
• Short circuit resistance: 10 s at rated voltage
• Body material: Aluminum

bosch rexroth xm21

• Cycle time: Minimum: 250 μs
• Body: Aluminum
• Connectors: M12, M23

rexroth xm42

Memory:

• Type: DDR4
• Capacity: 4 GB (expandable to 8 GB)
• Storage: 4 GB of built-in flash memory
• SD card slot for memory expansion

rexroth 7294

• Working fluid temperature: From -20°C to +100°C (-4°F to +212°F)
• Viscosity of working fluid: Up to 32 cSt (centistokes)
• Maximum air pressure: 10 bar (145 psi)

7930 rexroth

• Efficiency: Up to 85%
• Viscosity of the working fluid: 32-1000 cSt
• Working fluid temperature: -40°C to +80°C
• Filtering level: ISO 11/24

rexroth a10

• Operating temperature: from -40°C to +100°C
• Shaft type: keyed

rexroth a10v

• Operating temperature range: -40°C to +100°C.
• Fluid temperature should not exceed 80°C.

a10v045

• Connections: DIN, SAE, BSP
• Type of regulation: Fixed or pressure/power adjustable
• Noise level: 70 dB(A) at maximum pressure and speed
• Process fluid temperature: -40°C to +100°C
• Type of working fluid: HLP, HLPF, HVLP mineral oil