Pepperl+Fuchs Explosion Protection
Choose a subcategory:
Show all categories
- Interface between the I/O modules and the PCS/PLC
- Com unit for 80 analog or 184 digital channels
- Communication via MODBUS RTU
- Mounting in Zone 2, Class I/Div.2 or in the safe area
- HART communication via service bus
- Configuration via FDT 1.2 DTM
- Non-volatile memory for configuration and parameter settings
- Self configuration in redundant systems
- Permanently self-monitoring
- Outputs drive to safe state in case of failures
- Module can be exchanged under voltage
- Interface between the I/O modules and the PCS/PLC
- Com unit for 80 analog or 184 digital channels
- Communication via PROFIBUS DP
- Mounting in Zone 2, Class I/Div.2 or in the safe area
- HART communication via PROFIBUS DP V1 or service bus
- Configuration via FDT 1.2 DTM
- Configuration in run (CiR) for any PCS
- Non-volatile memory for configuration and parameter settings
- Self configuration in redundant systems
- Permanently self-monitoring
- Outputs drive to safe state in case of failures
- Module can be exchanged under voltage
- Interface between the I/O modules and the PCS/PLC
- Com unit for 80 analog or 184 digital channels
- Communication via PROFIBUS DP
- Mounting in Zone 2, Class I/Div.2 or in the safe area
- HART communication via PROFIBUS DP V1 or service bus
- Configuration via FDT 1.2 DTM
- Configuration in run (CiR) for any PCS
- Non-volatile memory for configuration and parameter settings
- Self configuration in redundant systems
- Permanently self-monitoring
- Outputs drive to safe state in case of failures
- Module can be exchanged under voltage
- Interface between the I/O modules and the PCS/PLC
- Com unit for 80 analog or 184 digital channels
- Communication via MODBUS TCP
- Mounting in Zone 2, Class I/Div.2 or in the safe area
- HART communication via MODBUS TCP or service bus
- Configuration via FDT 1.2 DTM
- Non-volatile memory for configuration and parameter settings
- Self configuration in redundant systems
- Permanently self-monitoring
- Outputs drive to safe state in case of failures
- Module can be exchanged under voltage
- Interface between the I/O modules and the PCS/PLC
- Mounting in Zone 2, Class I/Div.2 or in the safe area
- Non-volatile memory for configuration and parameter settings
- Communication via PROFINET
- HART communication via PROFINET and HART I/P
Vibration Limit Switch
- Surge protection barrier for 2 signal lines
- Nominal voltage 24 V DC
- Surge protection barrier for grounded signal lines
- Max. surge current (8/20 ?µs) 20 kA
- Connection via screw terminals
- DIN rail mountable
- Up to SIL 3 acc. to IEC/EN 61508
- Surge protection for 4 supply lines
- Type 2 acc. to EN 61643-11
- For TN-S systems (230 V AC/400 V AC)
- Pre-wired unit
- Operating state and fault indication of every protected line
- Fault indication output
- DIN rail mountable
- No contact with test object required
- Highly sensitive tip
- Resistent to dirt
- Optical indication
- Built-in test magnet for self-test and battery control
- 4 segments, redundant, individual modules per segment
- Customized for Honeywell, C-Series
- High-power trunk: Live work on devices in any hazardous area
- Optimized for size and quality, low heat dissipation
- For FOUNDATION Fieldbus H1
- Optional advanced diagnostics
- Passive impedance and CREST technology for high reliability
- Installation in Zone 2/Div. 2
- 2-channel
- Plugs directly in to field side of KF modules
- Analog or digital signal inputs
- Surge protection up to 10 kA
- Protects leads 1, 2, 3, 4, 5 and 6 of KF modules
- Uninterruptable operation (auto reset)
- Capacitive multitouch screen
- 5 MP camera with autofocus and LED flash
- Outstanding wireless connectivity
- Intel Wireless AC9260
- Bluetooth?® 5.0
- 11.6 inch widescreen display
- Can be used in sunlight
- Windows?® 10 Pro
- 802.11 a/b/g/n/ac
- Eighth-generation Intel?® processor
- Accessories and peripheral devices allow a wider range of applications
- Global certificates - a common platform
- Capacitive multitouch screen
- 1-D/2-D barcode scanner
- 5 MP camera with autofocus and LED flash
- Outstanding wireless connectivity
- Intel Wireless AC9260
- Bluetooth?® 5.0
- 11.6 inch widescreen display
- Can be used in sunlight
- Windows?® 10 Pro
- 802.11 a/b/g/n/ac
- Eighth-generation Intel?® processor
- Accessories and peripheral devices allow a wider range of applications
- Global certificates - a common platform
- N+1 redundancy provides highest reliability
- Diagnostics and fault indication
- Modular and hot swappable
- Automatic load sharing
- Adjustable voltage
- Fanless
- ATEX, IECEx, and cULus approvals for Div 2/Zone 2
- 6-position backplane for PS2500/PS3500 series power modules
- Multiple input/output wiring configurations
- Removable terminals for easy wiring
- Serial or parallel fault bus
- ATEX, IECEx, and cULus approvals for Div 2/Zone 2
- Certified for ATEX and IECEx Zone 1/21
- UL listed for USA and Canada
- Galvanic isolation between input and output
- Provides an output power up to 80 W at 24 V DC
- Fully IP66 rated
- Certified for ATEX and IECEx Zone 1/21
- UL listed for USA and Canada
- Galvanic isolation between input and output
- Provides an output power up to 80 W at 24 V DC
- Fully IP66 rated
- art. 204715-0011
- Instruments in Zone 0...1/Div. 1
- Short circuit current limitation per output
- For installation in Zone 2 environments, supplies keyboards in Zone 1/21
- 2 USB channels
- Data rates up to 480 Mbit/s
- Max. cable length 10 m (5 m before device, 5 m after device)
- Powered via USB, no separate power connection required
- Replaceable SIM
- Global certificates - a common hardware platform
- Android 9 operating system
- Wireless connections such as WWAN, 4G LTE, WLAN, etc.
- Android Enterprise Recommended verified device
- GPS
- NFC technology for wireless applications
- Service contract
- Special buttons for lone worker protection (LWP) applications
- Special buttons for push-to-talk (PTT) applications
- Latest available Android version for this device
- Replaceable SIM
- Global certificates - a common hardware platform
- Android 9 operating system
- Wireless connections such as WWAN, 4G LTE, WLAN, etc.
- Android Enterprise Recommended verified device
- GPS
- NFC technology for wireless applications
- Service contract
- Special buttons for lone worker protection (LWP) applications
- Special buttons for push-to-talk (PTT) applications
- Latest available Android version for this device
- Replaceable SIM
- Wireless connections such as WWAN, 4G LTE, WLAN, etc.
- Camera (front and main/optional)
- 8 MP camera with built-in flash on the main screen
- 5 MP front camera
- Comprehensive security thanks to Samsung KNOX
- Accessories and peripheral devices allow a wider range of applications
- Suitable for use with gloves
- NFC technology for wireless applications
- GPS
- Global certificates - a common platform
- Latest available Android version for this device
Connection cable
- 1-channel
- Installation in Zone 1, Zone 21, and Class I Div. 1
- WirelessHART Adapter
- Battery operated
- Also supplies field device
- Input 2-wire HART transmitters and 2-wire HART current sources
- Output WirelessHART wireless interface
- Direct mounting on HART or 4 mA ... 20 mA field device
- Rotatable antenna
- 1-channel
- WirelessHART Adapter
- Battery operated
- Also supplies field device
- Input 2-wire HART transmitters and 2-wire HART current sources
- Output WirelessHART wireless interface
- Direct mounting on HART or 4 mA ... 20 mA field device
- Rotatable antenna
- 1-channel
- Installation in Zone 1
- WirelessHART Adapter
- Battery operated
- Also supplies field device
- Input 2-wire HART transmitters and 2-wire HART current sources
- Output WirelessHART wireless interface
- Direct mounting on HART or 4 mA ... 20 mA field device
- Rotatable antenna
- Installation in Zone 1, 21
- Installation in Class I, II, Division 1
- Installation in Class III
- Ex d housing for Ex d field devices
- Cast aluminum housing
- Loop powered
- Direct mounting on HART or 4 mA ... 20 mA field device
- Encapsulated antenna
- Up to 8 field devices in multidrop
- MODBUS WirelessHART Gateway
- Graphical network analysis
- Simple and automatic configuration options
- Ethernet and RS 485 interface
- HART and MODBUS protocol via both interfaces
- Input WirelessHART wireless interface
- 24 V DC supply
- Redundant power supply connections
- EtherNet/IP WirelessHART Gateway
- Graphical network analysis
- Simple and automatic configuration options
- Ethernet and RS 485 interface
- HART protocol via both interfaces
- EtherNet/IP protocol via Ethernet interface
- Input WirelessHART wireless interface
- 24 V DC supply
- Redundant power supply connections