Baumer GBP5H - CANopen® Absolute encoders


Item Number: GBP5H - CANopen®
Voltage supply | 10...30 VDC |
Reverse polarity protection | Yes |
Consumption w/o load | ≤50 mA (24 VDC) |
Operating temperature | -25...+85 °C -40...+85 °C (optional) |
- Overview
- Datasheet
- Alternative numbers
- Comments
Programmable parameters | Operating modes Total resolution Scaling Rotation speed monitoring |
Protection DIN EN 60529 | IP 54 IP 65 (optional) |
Rotor moment of inertia | 20 gcm² |
manufacter SKU | GBP5H - CANopen® |
Size (flange) | ø58 mm |
Identifier | 11 bit |
Weight approx. | 500 g |
Consumption w/o load | ≤50 mA (24 VDC) |
Absolute accuracy | ±0.01 ° |
Code sequence | CW/CCW programmable |
Resistance | DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 100 g, 4 ms |
Status indicator | DUO-LED integrated in housing |
Initializing time typ. | 250 ms after power on |
Starting acceleration | ≤1000 U/s² |
Function | Multiturn |
Output stages | CAN bus standard ISO / DIS 11898 |
Operating temperature | -25...+85 °C -40...+85 °C (optional) |
Code | Binary |
Emitted interference | DIN EN 61000-6-4 |
Steps per turn | ≤262144 / 18 bit |
Approval | UL approval / E63076 |
Interference immunity | DIN EN 61000-6-2 |
Number of turns | ≤16384 / 14 bit |
Starting torque | ≤0.015 Nm (IP 54) |
Operating mode | Event-triggered / Time-triggered Remotely-requested Sync (cyclic) / Sync (acyclic) |
Materials | Housing: steel Flange: aluminium |
Shaft type | ø10 mm (through hollow shaft) ø12 mm (through hollow shaft) ø14 mm (through hollow shaft) |
Operating speed | ≤6000 rpm (mechanical) ≤6000 rpm (electric) |
Connection | Connector M12, 5-pin Connector M23, 12-pin |
Transmission rate | 10...1000 kBaud |
Interface | CANopen® |
Reverse polarity protection | Yes |
Voltage supply | 10...30 VDC |
Diagnostic functions | Position or parameter error Multiturn sensing |
Profile conformity | CANopen® CiA DSP 406 V 3.0 |
Sensing method | Optical |
Relative humidity | 95 % non-condensing |
People also buy
Comments
No comments yet