Baumer EAM300-S - CANopenВ® MAGRES Solid shaft encoder with synchro flange

Baumer EAM300-S - CANopenВ® MAGRES
Item Number: EAM300-S - CANopenВ® MAGRES
  • Encoder single- or multiturn / CANopenВ®
  • Precise magnetic sensing
  • Angular accuracy up to В±0.15В°
  • High protection up to IP 67
  • High resistance to shock and vibrations
  • Electronic gear function
  • Radial or axial plug and cable connection
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Baumer Article no10106004
Voltage supply10...30 VDC
Consumption typ.20 mA (24 VDC, w/o load)
Initializing time? 170 ms after power on
Data currency<1 ms
InterfaceCANopenВ®CANopenВ®-Lift
FunctionMultiturnSingleturn
Profile conformityCANopenВ® CiA communication profile DSВ 301, LSS profile DSPВ 305, device profile DSВ 406, DSВ 417
Steps per revolution?16384 / 14В bit
Number of revolutions?262144 / 18В bit
Absolute accuracyВ±0.15 В° (+20 В±15 В°C)В±0.25 В° (-40...+85 В°C)
Sensing methodMagnetic
Code sequenceCW: ascending values with clockwise sense of rotation; looking at flange
Output stagesCAN-Bus, LV (3.3 V) compatible ISOВ 11898
Interference immunityEN 61000-6-2
Emitted interferenceEN 61000-6-3 (cable length <30 m, no connection to DC network)EN 61000-6-4
ApprovalUL approval / E217823
Size (flange)Гё30В mm
Shaft typeГё5 x 12В mm solid shaftГё6 x 12В mm solid shaftГё8 x 12В mm solid shaft
FlangeSynchro flange
ProtectionВ ENВ 60529IP 65 (without shaft seal)IPВ 67В (withВ shaftВ seal)
Operating speed?6000 rpm
Starting torque?0.75 Ncm (+20 В°C, IP 65)?1.1 Ncm (+20 В°C, IP 67)
Moment of inertia0.98 gcmВІ
Admitted shaft load?10 N axial?10 N radial
MaterialHousing: steel zinc-coatedFlange: aluminiumShaft: stainless steel
Operating temperature-40...+85В В°C (seeВ generalВ information)
Relative humidity95 %
ResistanceEN 60068-2-6Vibration 30В g, 10-2000 HzEN 60068-2-27Shock 500 g, 1 ms
Weight approx.150 g
ConnectionFlange connector M12, 5-pinCable 2 m

Comments

No comments yet

Write a comment