Baumer EAM580R-SY - CANopenВ® MAGRES redundant Solid shaft encoder with synchro flange

Baumer EAM580R-SY - CANopenВ® MAGRES redundant
Item Number: EAM580R-SY - CANopenВ® MAGRES redundant
  • Encoder single- or multiturn / CANopenВ® redundant
  • Redundant sensing with galvanical separation
  • Resolution max. 32 bit (14 bit ST, 18 bit MT)
  • E1 compliant design
  • High protection IP 67
  • High resistance to shock and vibrations
  • Protection against corrosion CX (C5-M)
  • Wire cross section 0.5 mmВІ
  • Applicable up to PLd (ISO 13849)
Price on Request
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Baumer Article no10252773
Voltage supply10...30 VDC
Consumption typ.35 mA (24 VDC, w/o load)
Initializing time? 1 s after power on
Profile conformityCANopenВ® CiACommunication profile DSВ 301LSS profile DSPВ 305Device profile DSВ 406
Steps per revolution?16384 / 14В bit
Number of revolutions?262144 / 18В bit
Absolute accuracyВ±0.15 В° (+20 В±15 В°C)В±0.25 В° (-40...+85 В°C)
Sensing methodMagnetic
Code sequenceCW: ascending values with clockwise sense of rotation; looking at flange
Output stagesCAN-Bus, LV (5 V) compatible ISOВ 11898
Interference immunityEN 61000-6-2ISO 11452-2:2004* / -5:2002*ISO 7637-2:2011*ISO 16750-2:2012*ISO 10605:2008 + Amd 1:2014 (CD В±8 kV / AD В±15 kV)* Severity level according to ECE R10 (Rev. 5)
Emitted interferenceEN 61000-6-4CISPR 25:2008 (30...1000В MHz)ISO 7637-2:2011** Severity level according to ECE R10 (Rev. 5)
MTTFd (ISO 13849)High (>100 years) per channelUse in safety functions exclusively based on Application Note and MTTFd reliability prediction (request separately).
ApprovalUL approval / E217823
Size (flange)Гё58В mm
Shaft typeГё6 x 10В mm, solid shaft with flat
FlangeSynchro flange
ProtectionВ ENВ 60529IPВ 67В (withВ shaftВ seal)
Operating speed?6000 rpm
Starting torque?2.5 Ncm (+20 В°C, IP 67)
Moment of inertia15.38 gcmВІ
Admitted shaft load?40 N axial?80 N radial
MaterialHousing: steel, powder-coatedFlange: aluminiumShaft: stainless steel
Corrosion protectionIEC 60068-2-52 Salt mistfor ambient conditions CX (C5-M) according to ISO 12944-2
Operating temperature-40...+85В В°C (seeВ generalВ information)
Relative humidity95 %
ResistanceEN 60068-2-6Vibration 30В g, 10-2000 HzEN 60068-2-27Shock 500 g, 1 ms
Weight approx.250 g
ConnectionFlange connector M12, 5-pinCable 2 m


No comments yet

Write a comment