Pepperl+Fuchs FB1301B2

Digital Input
Pepperl+Fuchs FB1301B2
One click request
Shock resistanceshock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18
Massapprox. 350 g
Connectionbackplane bus
Codingoptional mechanical coding via front socket
Degree of protectionIEC 60529:2000
Number of channels2
Vibration resistancefrequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration В± 0.075 mm/1 g; 10 cycles
frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration В± 1 mm/0.7 g; 90 minutes at each resonance
System informationThe module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the corresponding EC-type examination certificate.
Damaging gasdesigned for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
EU-Type Examination CertificateBVS 11 ATEX E 093 X
Power dissipation0.65 W
Connectionbackplane bus
Shock resistanceEN 60068-2-27:2009
Damaging gasEN 60068-2-42:2003
Relative humidity95 % non-condensing
ConnectionEx e spring terminal with protective cover
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
LED indicationLED green: supply
LED red: line fault, per channel
LED yellow: signal (status), per channel
Degree of protectionIP20 (module) , a separate housing is required acc. to the system description
Switching point/switching hysteresis1.2 ... 2.1 mA / В± 0.2 mA
Environmental testEN 60068-2-14:2009
Rated voltage12 V DC , only in connection with the power supplies FB92**
ATEX approvalBVS 11 ATEX E 093X
INMETROBrazil: TГњV 14.1599X
EAC approvalRussia: RU C-IT.MIII06.B.00129
Connectionchannel I: 1+, 2/3-; channel II: 4+, 5/6-
Electromagnetic compatibilityNE 21:2007
Relative humidityEN 60068-2-78:2001
Vibration resistanceEN 60068-2-6:2008
Rated valuesacc. to EN 60947-5-6 (NAMUR)
Power consumption0.65 W
Dimensions28 x 107 x 132 mm (1.1 x 4.2 x 5.2 inch)
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see
Internal resistor1 kandOmega;
Minimum pulse duration20 ms
Line fault detectioncan be switched on/off for each channel via configuration tool
Occupied slots1
Storage temperature-25 ... 85 В°C (-13 ... 185 В°F)
Interfacemanufacturer-specific bus to standard com unit
in international format without spaces
All fields are required