Pepperl+Fuchs FB6208B

Digital Output with Shutdown Input
Pepperl+Fuchs FB6208B
849.66
One click request

Dimensions57 x 107 x 132 mm (2.2 x 4.2 x 5.2 inch)

Massapprox. 750 g
LED indicationLED green: supply
LED red: line fault , communication error red flashing
Current limit8 mA
Damaging gasdesigned for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Connectionchannel I: 1+, 2-; channel II: 3+, 4-; channel III: 5+, 6-; channel IV: 7+, 8-; channel V: 9+, 10-; channel VI: 11+, 12-; channel VII: 13+, 14-; channel VIII: 15+, 16-
Electromagnetic compatibilityNE 21
Connectionbackplane bus
Degree of protectionIP20 (module) , a separate housing is required acc. to the system description
EU-Type Examination CertificatePTB 97 ATEX 1074 U
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
System informationThe module has to be mounted in appropriate backplanes and housings (FB92**) in Zone 1, 2, 21, 22 or outside hazardous areas (gas or dust). Here, observe the corresponding EC-type examination certificate.
Vibration resistanceEN 60068-2-6
Shock resistanceEN 60068-2-27
ATEX approvalPTB 97 ATEX 1075 ; PTB 97 ATEX 1074 U
Relative humidityEN 60068-2-56
Power consumption2.35 W
Power dissipation2.35 W
Shock resistanceshock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18
Number of channels8
Storage temperature-25 ... 85 В°C (-13 ... 185 В°F)
Codingoptional mechanical coding via front socket
Rated voltage12 V DC , only in connection with the power supplies FB92**
Line fault detectioncan be switched on/off for each channel via configuration tool
Watchdogwithin 0.5 s the device goes in safe state, e.g. after loss of communication
Damaging gasEN 60068-2-42
Environmental testEN 60068-2-14
Response time20 ms (depending on bus cycle time)
Relative humidity95 % non-condensing
Degree of protectionIEC 60529
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Interfacemanufacturer-specific bus to standard com unit
EAC approvalRussia: RU C-IT.MIII06.B.00129
Connectionbackplane bus
Open loop voltage20 V
Occupied slots2
Connectionremovable front connector with screw flange (accessory)
wiring connection via spring terminals (0.14 ... 1.5 mm2) or screw terminals (0.08 ... 1.5 mm2)
Vibration resistancefrequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration В± 0.075 mm/1 g; 10 cycles
frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration В± 1 mm/0.7 g; 90 minutes at each resonance
in international format without spaces
All fields are required