Pepperl+Fuchs M-LB-Ex-5211

Protection Module
Pepperl+Fuchs M-LB-Ex-5211
One click request
Rated current500 mA , restrictions see derating characteristics
Mountingpluggable in base module for mounting on 35 mm DIN mounting rail
Functional safetyIEC/EN 61508:2010
Signal lines/power supplyreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Series resistance 0.5 andOmega; per line at 25 В°C (77 В°F)
Degree of protectionIEC 60529:2013
Nominal voltage1 V DC
Impulse reset time< 500 ms
Impulse rating1 kV/0.5 kA (category C1)
10 kV/5 kA (category C2)
1 kA (category D1)
Status indicationfault and maintenance signal via Universal Power Rail M-UPR-03-S
Nominal voltagesee power feed module M-LB-5300
Signal lines/fault indication outputreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Surge protective devices for low voltageEN 61643-21:2001+A1:2009+A2:2013
IEC 61643-21:2001+A1:2008+A2:2012
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see
Number of protected signal lines1
Degree of protectionIP20
Insertion loss 0.05 dB, at 0 ... 4 kHz, in 600 andOmega;-System
3 dB, at 0 ... 350 kHz, in 100 andOmega;-System
Connectionvia Universal Power Rail M-UPR-03-S
Massapprox. 20 g
Current 8 mA
EU-Type Examination CertificateBVS 17 ATEX E 069 X
Impulse discharge current (10/350 micro/s)1 kA per line (2x)
Relative humiditymax. 95 % , without condensation
Display elementsLED PWR (power supply), green LED
LED FLT (fault signal), red LED
LED CHK (maintenance signal), yellow LED
Total discharge current (8/20 micro/s)10 kA (1x)
Nominal discharge current (8/20 micro/s)5 kA per line (10x)
Leakage current< 5 andmicro;A x (number of used modules - 1) at 1 V and 25 В°C (77 В°F) . line-line
Rated surge current (8/20 micro/s)10 kA per line (1x)
Maximum continuous operating voltage6 V DC
Connectionprotected area: terminal 4
unprotected area: terminals 1, 2, 3
Designationsystem components:
- base module with screw terminals M-LB-Ex-5000
- base module with spring terminals M-LB-Ex-5000.SP
- power feed module M-LB-5300
- fault status module M-LB-5400
- maintenance status module M-LB-5500
- universal power rail M-UPR-03-S
- place holder module M-LB-Ex-5900
- separation wall M-UPR-I
Voltage protection levelmax. 22 V line-line for nominal discharge current In
max. 1400 V line-earth for nominal discharge current In
Dimensions6.2 x 77 x 79 mm
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Safety Integrity Level (SIL)SIL 3
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F)
Observe the temperature range limited by derating, see section derating.
in international format without spaces
All fields are required