Baumer Incremental encoder
ITD 40 A 4 Y90
- Mounting by torque support
- TTL or HTL output signals
- Cable output radial or axial
art. 11060519
| Voltage supply | 5 VDC ±5 % 8...30 VDC |
| Reverse polarity protection | Yes |
| Consumption w/o load | ≤100 mA |
| Operating temperature | -20...+70 °C -20...+100 °C |
Incremental encoders
- Max. 10000 pulses per revolution
- Optical sensing method
- Through hollow shaft
- Mounting by torque support
- TTL or HTL output signals
Baumer incremental miniature encoder.
Incremental optical encoder by Baumer ITD 4 A 4 with blind hollow shaft.
10 mm (through the hollow shaft), 12 mm (through the hollow shaft), 14 mm (through the hollow shaft)
art. 11063147
Incremental encoder with hollow shaft, detachable cable – tangential outlet and wide operating temperature range.
ITD21H00 2048 T NI S21SG8 E 14 IP65
Incremental encoder with hollow shaft, detachable cable – tangential outlet and wide operating temperature range.Catalogue number 11063146.
- Resolution 512ppr pulses / revolution
- 14mm shaft bore diameter
- 1 x digital output 8-30Vdc
art. 11106854
Used for EIL580 incremental encoders with blind or through hollow shaft.
MDFK 08G2101 art. 10128295
- 270° linear
- 1,41 °
- ± 0,6 %
- current output
- -40 ... +85 °C
Encoders without bearings - incremental
- Electronics is fully encapsulated, high protection
- Large tolerances: axial ±3 mm, radial max. 2.2 mm
- Sensor head with integrated FPGA signal processing
- Magnetic rotor included in delivery
Incremental encodersPOG 10 DN 1024
Baumer POG10 DN 1200 I B5n 14k6x30
IN STOCK!!!
Tether arm T3
- Accessory for Baumer 11076547
- Prevents overload of the bearing force
- Flexible mounting point orientation
- Adjustable length
- For bolt 1/4”
- For replacement of "PY" or "BC" style tachogenerators
- Low response time
- Open circuit voltage 20...100 mV per rpm
- Very high resistance to shock
- High signal quality due to patented LongLife technology
- Recognition of sense of rotation possible via control
- CSA / C / US approved
| Voltage supply | 5 VDC ±10 % 10...30 VDC |
| Consumption typ. | 60 mA (5 VDC, w/o load) 40 mA (24 VDC, w/o load) |
| Pulses per revolution | 4096...320000 |
| Operating temperature | -20...+85 °C |
| Voltage supply | 5 VDC ±5 % |
| Consumption typ. | 100 mA (5 VDC, w/o load) |
| Sinewave cycles per turn | 1000...5000 |
| Operating temperature | -20...+85 °C |
| Voltage supply | 5 VDC ±10 % 10...30 VDC |
| Consumption typ. | 80 mA (5 VDC, w/o load) 60 mA (24 VDC, w/o load) |
| Pulses per revolution | 20...5000 |
| Operating temperature | -20...+85 °C |
| Voltage supply | 5 VDC ±5 % |
| Consumption typ. | 100 mA (5 VDC, w/o load) |
| Sinewave cycles per turn | 1000...5000 |
| Operating temperature | -20...+85 °C |
| Voltage supply | 5 VDC ±10 % 10...30 VDC |
| Consumption typ. | 80 mA (5 VDC, w/o load) 60 mA (24 VDC, w/o load) |
| Pulses per revolution | 10000...320000 |
| Operating temperature | -20...+85 °C |
| Voltage supply | 5 VDC ±10 % 10...30 VDC |
| Consumption typ. | 30 mA (5 VDC, w/o load) 15 mA (24 VDC, w/o load) |
| Pulses per revolution | 64...2048 |
| Operating temperature | -20...+85 °C |
- Freely programmable on and off switching speed
- 3 adjustable switching speeds
- Actual speed indicator
- Switching points adjustable up to 20000 rpm
- Switching points can be adjusted individually for both rotating directions
- Suitable for rugged environment
32...1024 PPR
- Parameterizable incremental encoder (HTL)
- Simple position and speed detection via IO-Link
- Speed monitor function via switching output
- Bearingless magnetic sensing
- Maximum resolution 4096 steps per revolution
- Parameterizable incremental encoder (HTL)
- Simple position and speed detection via IO-Link
- Speed monitor function via switching output
- Bearingless magnetic sensing
- Maximum resolution 4096 steps per revolution
- Parameterizable incremental encoder (HTL)
- Simple position and speed detection via IO-Link
- Speed monitor function via switching output
- Bearingless magnetic sensing
- Maximum resolution 4096 steps per revolution