Baumer Incremental encoders
hog 100
- High resolution
- Blind hollow shaft ø16 mm or cone shaft ø17 mm (1:10)
- Optical sensing method
- Output stage HTL or TTL
- Output stage with regulator 9...30 VDC
- Hybrid bearing for extended service life
- Large terminal box, turn by 180° or axial terminal cover
HOG 11
- Blind hollow shaft or cone shaft
- Offshore and salt water firm, high protection IP 67
- TTL output driver for cable length up to 550 m
HOG 11 + ESL 90
- Offshore and salt water firm, high protection IP 67
- TTL output driver for cable length up to 550 m
- Electronic speed monitoring
- Circuit breaker with one selectable threshold speed
- Hybrid bearing for extended service life
- Terminal boxes, turn by 180°
Baumer HOG 11 G
- Offshore and salt water firm, high protection IP 67
- TTL output driver for cable length up to 550 m
- Hybrid bearing for extended service life
- Large terminal boxes, turn by 180°
Baumer HOG 14
- Through hollow shaft up to ø75 mm
- Optical sensing method
- Output stage HTL or TTL
- Output stage TTL with regulator UB 9...26 VDC
Baumer HOG 16
- Through hollow shaft ø20...38 mm
- Output stage HTL, TTL or TTL with regulator UB 9...26 VDC
- Large terminal box, turn by 180°
HOG 161
- Through hollow shaft ø38...75 mm
- Output stage HTL or TTL
- Output stage TTL with regulator UB 9...26 VDC
- Large terminal box, turn by 180°
Baumer HOG 163
- Through hollow shaft ø38...75 mm
- Optical sensing method
- Output stage HTL or TTL
- Output stage TTL with regulator UB 9...26 VDC
- Large terminal box, turn by 180°
HOG 163 DN 1024 I
- Through hollow shaft ø75 mm, 1024 pulses per revolution
- Optical sensing method
- HTL output driver for cable length up to 350 m
- Large terminal box, turn by 180° with cable 1 m and M23 connector
Baumer HOG 165 + DSL.E
- Programming via included software (RS485 interface)
- Logic level TTL or HTL
- 512...4096 pulses per revolution
- Through hollow shaft ø25 mm
- DSL.R: 3 outputs speed controlled (independent transistor outputs)
- DSL.E: 2 outputs speed controlled and 1 control output
hog 22
- Optical sensing method
- Robust light-metal housing
- Output stage HTL or TTL
- Output stage TTL with regulator UB 9...26 VDC
- Large terminal box, turn by 180°
HOG 220 Incremental encoders
- Through hollow shaft ø80...115 mm
- Robust light-metal housing
- Output stage HTL or TTL
- Output stage TTL with regulator UB 9...26 VDC
HOG 28
- Through hollow shaft ø120...150 mm
- Optical sensing method
- Output stage HTL or TTL
- Output stage TTL with regulator UB 9...26 VDC
- Large terminal box, turn by 180°
art. 11076784
| Voltage supply | 9...26 VDC 5 VDC ±5 % |
| Consumption w/o load | ≤100 mA |
| Pulses per revolution | 64...2048 |
| Operating temperature | -20...+85 °C |
Baumer HOG 75
- Through hollow shaft ø12...26 mm
- Optical sensing method
- Compact, robust aluminium housing
- Inside connecting terminals
- Output stage HTL or TTL
- Output stage TTL with regulator UB 9...26 VDC
Baumer HOG 8
- Through hollow shaft ø10...16 mm
- Output stage HTL or TTL
- Output stage TTL with regulator UB 9...26 VDC
HOG 86
- Insulated blind hollow shaft ø12...16 mm, cone shaft ø17 mm
- High shaft load up to 450 N
- Shaft insulation up to 2.8 kV
- Highest operating speed 10000 rpm
- Terminal box, turn by 180°
Baumer HOG 86+ FSL
- Encoder with integrated centrifugal switch
- Mechanical speed monitoring based on centrifugal force
- Two-sided bearing system with optimal bearing spacing
- Shaft load up to 450 N
- Shaft insulation up to 2.8 kV
- Terminal boxes, turn by 180°
HOG 86 M
- Robust, compact housing
- High shaft load up to 450 N
- Shaft insulation up to 2.8 kV
- Highest operating speed 10000 rpm
- Terminal boxes, turn by 180°
HOG 86E is a robust incremental encoder
- High shaft load up to 450 N
- Shaft insulation up to 2.8 kV
- Highest operating speed 10000 rpm
- TTL output driver for cable length up to 550 m
- Terminal box, turn by 180°
Baumer HOG 9
- Insulated blind hollow shaft ø12...16 mm, cone shaft ø17 mm
- High shaft load up to 450 N
- Shaft insulation up to 2.8 kV
- Highest operating speed 10000 rpm
- Terminal box, turn by 180°
HOG10 DN 1000 incremental encoder
- Transmission length: ≤350 m at 100 kHz (HTL-P), ≤550 m at 100 kHz (TTL)
- Interference resistance: EN 61000-6-2
- Radiated interference: EN 61000-6-3
- Size (flange): Ø105 mm
- Shaft type: Ø12...20 mm (blind hollow shaft), Ø17 mm (1:10 tapered shaft)
- Permissible load on the shaft: ≤450 N axial, ≤600 N radial
- Protection: EN 60529, IP 66
HOG10 DN 1024 incremental encoder
- Reference signal: Zero pulse, width 90°
- Output signal frequency: ≤120 kHz
- Output signals: K1, K2, K0 + inverted
- Output stages: HTL-P (power line driver)
- Shaft insulation: Up to 2.8 kV
- Transmission length: ≤350 m at 100 kHz (HTL-P)
art. 11070362
Incremental encoders - combination HOG 10 +KLK-AX
- art. 11070362
- 9-30VDC
- 1024 PPR
Incremental encoders - combination HOG 10 + FSL
- HTL output driver for cable length up to 350 m
- Mechanical speed monitoring based on centrifugal force
- Double-side bearing with hybrid bearing for extended service life
- Terminal boxes, turn by 180°
HOG10 DN 2048 incremental encoder
- Shift speed range: 1800...2499 rpm
- Housing material: Cast aluminum
- Shaft material: Stainless steel
- Operating temperature: -40...+100 °C
- Weight: Approximately 2.2 kg.
art. 11162978
HOG10.2 HeavyDuty encoder
- Protection: IP 66
- Operating speed: ≤6000 rpm
- Material: Housing - die-cast aluminum, shaft - stainless steel
- Operating temperature: -40...+100 °C (optionally down to -50 °C)
- Vibration resistance: 20 g, 10-2000 Hz
- Impact resistance: 300 g, 6 ms
Baumer HOG9 DN 2048 I 17K
- Size (flange): ø97 mm
- Shaft type: ø12...16 mm (blind hollow shaft), ø17 mm (1:10 tapered shaft)
- Permissible shaft load: ≤400 N axial, ≤500 N radial