Baumer

art. 11164061

art. 10144598

art. 10144599

art. 10144601

art. 10144602

art. 10144603

art. 11012177

art. 11003837

art. 11017788

art. 11224111

• art. 11224111
• Intiutive OLED display
• Programmable input configurations
• Crosstalk rejection between two sensors without a wire
• Six AUTOSET modes
• Advanced remote programming

og 71

• Encoder type: Incremental
• Detection method: Optical
• Body: aluminum
• Shaft: stainless steel
• Bearings: ball bearings
• Shaft diameter: 6 mm
• Shaft length: 15 mm
• Weight: 80 g

OG 8 Incremental encoder

• Solid shaft ø11 mm with EURO flange B10
• Optical sensing method
• EURO flange B10
• Output stage HTL or TTL
• Output stage TTL with regulator UB 9...26 VDC

The OG 9 from Baumer is an incremental encoder that is characterized by high reliability and accuracy. It is designed for use in heavy industry.

• Material: Housing - cast aluminum, shaft - stainless steel
• Operating temperature: -30...+100 °C (-25...+100 °C for >3072 pulses)
• Vibration resistance: IEC 60068-2-6 (10 g, 10-2000 Hz)
• Impact resistance: IEC 60068-2-27 (100 g, 6 ms)
• Corrosion protection: IEC 60068-2-52 (salt spray for C4 conditions according to ISO 12944-2)
• Explosion protection: II 3 G Ex ec IIC T4 Gc (gas), II 3 D Ex tc IIIB T135°C Dc (dust) (only with ATEX option)
• Weight: approx. 980 g

OG 90 incremental encoder

• Output signals: K1, K2, K0 + inverted
• Protection: IP 55
• Rotation speed: ≤12000 rpm
• Housing material: die-cast aluminum

og73

• Body materials: aluminum, powder coating
• Shaft materials: stainless steel
• Maximum rotation speed: up to 8000 rpm

OPDK 14P3901 S35A - Retro-reflective sensors - for longer ranges

• Incremental encoder (optionally programmable)
• HTL/TTL output driver for cable length up to 350 m
• Very high resistance to shock and vibrations
• Two-sided insulated bearing system with hybrid bearings
• Special protection against corrosion CX (C5-M)
• Large terminal box, turn by 180В°
• Function display via LEDs

pog 10

• TTL output driver for cable length up to 550 m
• High resistance to shock and vibrations
• EURO flange B10 / solid shaft ø11 mm
• Large terminal box, turn by 180°

Incremental encoders - combination

• TTL output driver for cable length up to 550 m
• Electronic speed monitoring
• EURO flange B10 / solid shaft ø11 mm
• Terminal boxes, turn by 180°

POG 10 + ESL 93

• TTL output driver for cable length up to 550 m
• EURO flange B10 / solid shaft ø11 mm
• Terminal boxes, turn by 180°

POG 10+ FSL is an incremental encoder

• Shaft type: ø11 mm solid shaft
• Permissible shaft load: ≤300 N axial, ≤450 N radial
• Temperature range: -40...+100 °C (optionally down to -50 °C)
• Protection: IP 66

art. 11042716

• art. 11042716
• POG10 DN 1024 I Solid shaft with a diameter of 11 mm.
• Flanges EURO B10.
• Increased shock and vibration protection.
• Encoder diameter 115 mm.

Incremental encoders - combination

• Twin encoder with two electrically separated systems
• TTL output driver for cable length up to 550 m
• EURO flange B10 / solid shaft ø11 mm

pog 11

• Size (flange): ø115 mm
• Shaft type: ø11 mm solid shaft
• Detection method: Optical
• Operating torque: 2 Ncm

• Mechanical speed monitoring based on centrifugal force
• Robust, compact housing
• Two bearings with large distance, one at each end
• High shaft load up to 350 N
• TTL output driver for cable length up to 550 m
• Terminal boxes, turn by 180В°

• Twin encoder featuring two separate systems
• Robust, compact housing
• Two bearings with large distance, one at each end
• High shaft load up to 350 N
• Shock resistant up to 300 g
• Highest operating speed 12000 rpm
• TTL output driver for cable length up to 550 m
• Terminal box, turn by 180В°