Baumer

• measuring mode: edges, center, width, gap
• 100 ... 150 mm
• pulsed red laser diode
• analog and RS 485
• Touch Display, RS485
• connector M12 8 pin
• -20 ... 50 °C
• IP 67

FlexFlow PF20S - Baumer flow sensors

• Flow sensor for industrial applications
• Flow and temperature measurement in a single sensor
• Binary or analog output signal
• Compact and robust

• Incremental encoder (optionally programmable)
• HTL/TTL output driver for cable length up to 350 m
• Very high resistance to shock and vibrations
• Two-sided insulated bearing system with hybrid bearings
• Special protection against corrosion CX (C5-M)
• Large terminal box, turn by 180В°
• Function display via LEDs

pog 10

• TTL output driver for cable length up to 550 m
• High resistance to shock and vibrations
• EURO flange B10 / solid shaft ø11 mm
• Large terminal box, turn by 180°

Incremental encoders - combination

• TTL output driver for cable length up to 550 m
• Electronic speed monitoring
• EURO flange B10 / solid shaft ø11 mm
• Terminal boxes, turn by 180°

POG 10 + ESL 93

• TTL output driver for cable length up to 550 m
• EURO flange B10 / solid shaft ø11 mm
• Terminal boxes, turn by 180°

POG 10+ FSL is an incremental encoder

• Shaft type: ø11 mm solid shaft
• Permissible shaft load: ≤300 N axial, ≤450 N radial
• Temperature range: -40...+100 °C (optionally down to -50 °C)
• Protection: IP 66

art. 11042716

• art. 11042716
• POG10 DN 1024 I Solid shaft with a diameter of 11 mm.
• Flanges EURO B10.
• Increased shock and vibration protection.
• Encoder diameter 115 mm.

Incremental encoders - combination

• Twin encoder with two electrically separated systems
• TTL output driver for cable length up to 550 m
• EURO flange B10 / solid shaft ø11 mm

pog 11

• Size (flange): ø115 mm
• Shaft type: ø11 mm solid shaft
• Detection method: Optical
• Operating torque: 2 Ncm

• Mechanical speed monitoring based on centrifugal force
• Robust, compact housing
• Two bearings with large distance, one at each end
• High shaft load up to 350 N
• TTL output driver for cable length up to 550 m
• Terminal boxes, turn by 180В°

• Twin encoder featuring two separate systems
• Robust, compact housing
• Two bearings with large distance, one at each end
• High shaft load up to 350 N
• Shock resistant up to 300 g
• Highest operating speed 12000 rpm
• TTL output driver for cable length up to 550 m
• Terminal box, turn by 180В°

pog 9

• Housing material: Aluminum
• Shaft: Solid shaft ø11 mm
• Flange: EURO flange B10
• Moment of inertia: 100 g/cm²
• Maximum axial play: 0.2 mm
• Maximum radial play: 0.05 mm

Incremental encoders - combination

• TTL output driver for cable length up to 550 m
• Circuit breaker with one selectable threshold speed
• EURO flange B10 / solid shaft ø11 mm
• Terminal boxes, turn by 180°

Incremental encoders - combination

• TTL output driver for cable length up to 550 m
• Mechanical speed monitoring based on centrifugal force
• EURO flange B10 / solid shaft ø11 mm
• Terminal boxes, turn by 180°

pog 90

• Housing material: Aluminum
• Shaft material: Stainless steel
• Moment of inertia: 0.004 kgcm²
• Maximum axial play: 0.1 mm
• Maximum radial play: 0.05 mm
• Weight: 0.17 kg

art. 11076614

• art. 11076614
  
• 9-30 dc
• output signal format - htl / voltage output

art. 11076982

POG10G DN 1024 I / DN 1024 I Incremental encoders - combination

• Twin encoder, blind hollow shaft, 1024 pulses per revolution
• HTL output driver for cable length up to 350 m
• Very high resistance to shock and vibrations
• Double-side bearing with hybrid bearing for extended service life
• Large terminal box, turn by 180°

PP20H Baumer - Fully welded pressure sensor with hygienic connection

• All market typical hygienic connections available
• Resistant to all common CIP cleaning media
• Condensate-proof measuring cell
• Optionally available with IO-Link (in parallel to 4 ... 20 mA)
• Space-savng installations from DN 25 on

art. 11120547

Baumer PC Programming Tool Z

art. 11120547

• Compact pressure switch 0 .. 6 bar max.40 bar
• 1 SPDT, G1/2 male

RTD 1 B14 Y 1 Resolver

• Solid shaft ø6 mm with synchro flange
• Robust resolver with solid shaft ø6 mm
• Rotation speed max. 10000 rpm
• Centering alignment ø50 mm
• Mounting hole circle ø68 mm
• Wide operating temperature range

RTD 4 A 4 Y 2 Resolvers

• Blind hollow shaft ø10 to ø16 mm
• Robust resolver with blind hollow shaft ø10...16 mm
• Rotation speed max. 8000 rpm
• Very high resistance to shock and vibrations

S2BG connection cable

• Connection type: M23 connector, 12-pin
• Weight: Approximately 440 g (for 5 m cable), 860 g (for 10 m cable).

Tachogenerators

• Solid shaft ø6 mm with flange
• Open circuit voltage 10...60 mV per rpm
• Solid shaft ø6 mm with flange
• Very high resistance to shock

Baumer TDP 0.2

• Size (flange): ø115 mm
• Supply voltage: 10...150 mV/rev/min

TachogeneratorsTDP 13

TachogeneratorsTDP 13