Baumer EIL580P-SQ Solid shaft with square flange

Baumer EIL580P-SQ
Item Number: EIL580P-SQ
  • Size Diam.58 mm
  • Precise optical sensing (interpolated)
  • Output signal level programmable (TTL or HTL)
  • Square flange 2.5" (63.5 mm)
  • Connection axial, radial or tangential
  • Pulses per revolution 1...65536, programmable
  • High protection up to IP 67
  • High resistance to shock and vibrations
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Solid shaft with square flange
Baumer Article no11065915
Voltage supply4.75...30 VDC
Reverse polarity protectionYes
Short-circuit proofYes
Consumption w/o load?70 mA
Initializing time? 30 ms after power on
Pulses per revolution1 ... 65536
Duty cycle45...55 % typical at 1024, 2048 ppr (further see table Duty cycle)
Reference signalZero pulse 90В° or 180В°
Sensing methodOptical
Output frequency?300 kHz (TTL)?160 kHz (HTL)
Output signalsA+, B+, R+, A-, B-, R-
Output stagesTTL/RS422HTL/push-pull
Programmable parametersOutput level TTL/HTLPulse number 1...65536Zero pulse width 90В°/180В°Zero pulse positionSignal sequence
Interference immunityEN 61000-6-2
Emitted interferenceEN 61000-6-3
ApprovalUL 508 / CSA 22.2
Size (flange)2.5 x 2.5" (63.5 x 63.5 mm)
Shaft typeГё10 x 20В mm, solid shaft with flatГё3/8" x 4/5" (Гё9.525 x 20.32 mm), solid shaft with flat
Admitted shaft load?40 N axial?80 N radial
FlangeSquare flange 2.5" (63.5 mm)
ProtectionВ ENВ 60529IP 65 (without shaft seal)IPВ 67В (withВ shaftВ seal)
Operating speed?6000 rpm (+20 В°C, IP 67)?12000 rpm (+20 В°C, IP 65)
Starting torque?0.015 Nm (+20 В°C, IP 65)?0.02 Nm (+20 В°C, IP 67)
MaterialHousing: aluminium die-castFlange: aluminiumSolid shaft: stainless steel
Operating temperature-40...+100В В°C
Relative humidity90 % non-condensing
ResistanceEN 60068-2-6Vibration 30В g, 10-2000 HzEN 60068-2-27Shock 300 g, 6 ms
ConnectionFlange connector M12, 8-pinFlange connector M23, 12-pinCable
Weight approx.370 g

Comments

No comments yet

Write a comment