Pepperl+Fuchs KCD2-SON-Ex2.SP Switch Amplifier

Pepperl+Fuchs KCD2-SON-Ex2.SP
Item Number: KCD2-SON-Ex2.SP
  • 2-channel isolated barrier
  • 24 V DC supply (Power Rail)
  • Dry contact or NAMUR inputs
  • 2 passive transistor outputs (resistive acc. to EN 60947-5-6)
  • Line fault transparency (LFT)
  • Housing width 12.5 mm
  • Connection via spring terminals with push-in connection technology
  • Up to SIL 2 acc. to IEC 61508
258.06
Quantity
-
+
Total price: 258.06
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Connection sidefield side
Input/power supplyreinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Labelingspace for labeling at the front
EU-type examination certificateBASEEFA 13 ATEX 0080
Rated valuesacc. to EN 60947-5-6 (NAMUR)
Pulse/Pause ratiomin. 100 µs / min. 100 µs
ConnectionPower Rail or terminals 9+, 10-
Connectionterminals 1+, 2-; 3+, 4-
Output I, IIsignal or error message, passive transistor output (resistive)
0-signal: 14 kΩ В± 10 %
1-signal: 1.8 kΩ В± 10 %
fault: > 100 kΩ
Collective error messagePower Rail
Switching frequency≤ 5 kHz
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Safety Integrity Level (SIL)SIL 2
InputEN 60947-5-6:2000
Degree of protectionIP20
Configurationvia DIP switches
CertificateCML 19 ATEX 4410 X
Connectionspring terminals
Output/Outputbasic insulation according to EN 50178, rated insulation voltage 50 Veff
Power dissipation≤ 750 mW
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Protection against electrical shockIEC 61010-1:2010
Ripple≤ 10 %
Switching point/switching hysteresis1.2 ... 2.1 mA / approx. 0.2 mA
Rated voltagetyp. 8 V max. 20 V DC
Signal typeDigital Input
Response time≤ 200 µs
Rated current35 ... 25 mA
Massapprox. 100 g
Open circuit voltage/short-circuit currentapprox. 10 V DC / approx. 8 mA
Output/power supplybasic insulation according to EN 50178, rated insulation voltage 50 Veff
Control elementsDIP-switch
Input/Outputreinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Dimensions12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2
Display elementsLEDs
Connection sidecontrol side
Connectionoutput I: terminals 5, 6 ; output II: terminals 7, 8
Rated voltage19 ... 30 V DC
Degree of protectionIEC 60529:2001
Optional accessories- power feed module KFD2-EB2(.R4A.B)(.SP)
- universal power rail UPR-03(-M)(-S)
- profile rail K-DUCT-BU(-UPR-03)
Electromagnetic compatibilityNE 21:2011 , EN 61326-3-2:2008
Line fault detectionbreakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA

Comments

No comments yet

Write a comment

captcha
in international format without spaces
All fields are required