Pepperl+Fuchs KCD2-ST-Ex1.LB.SP

Switch Amplifier
Pepperl+Fuchs KCD2-ST-Ex1.LB.SP
185.50
One click request
Pulse/Pause ratiomin. 100 µs / min. 100 µs
Connectionoutput I: terminal 5 ; output II: terminal 6
Input/power supplyreinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Degree of protectionIEC 60529:2001
InputEN 60947-5-6:2000
Control elementsDIP-switch
Power dissipation≤ 700 mW including maximum power dissipation in the output
Input/Outputreinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Open circuit voltage/short-circuit currentapprox. 10 V DC / approx. 8 mA
Optional accessories- power feed module KFD2-EB2(.R4A.B)(.SP)
- universal power rail UPR-03(-M)(-S)
- profile rail K-DUCT-BU(-UPR-03)
Signal level1-signal: (supply voltage) - 3 V max. for 50 mA
0-signal: blocked output (off-state current ≤ 10 µA)
Connectionspring terminals
Response time≤ 200 µs
Line fault detectionbreakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA
Electromagnetic compatibilityNE 21:2011
Rated valuesacc. to EN 60947-5-6 (NAMUR)
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Dimensions12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2
Rated current20 ... 15 mA + Iout
Massapprox. 100 g
Protection against electrical shockIEC 61010-1:2010
Connection sidefield side
Degree of protectionIP20
Safety Integrity Level (SIL)SIL 2
Connectionterminals 1+, 2-
Signal typeDigital Input
Switching frequency≤ 5 kHz
Rated current50 mA
Collective error messagePower Rail
Output/Outputnot available , common pole terminal 9+
Ripple≤ 10 %
Output IIsignal or error message ; Transistor
Rated voltage30 V DC
Switching point/switching hysteresis1.2 ... 2.1 mA / approx. 0.2 mA
ConnectionPower Rail or terminals 9+, 10-
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Display elementsLEDs
Output/power supplynot available , common pole terminal 9+
Configurationvia DIP switches
CertificateCML 19 ATEX 4410 X
Output Isignal ; Transistor
Rated voltage19 ... 30 V DC
Labelingspace for labeling at the front
Connection sidecontrol side
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
EU-type examination certificateBASEEFA 13 ATEX 0080
in international format without spaces
All fields are required