Baumer Encoders

TachogeneratorsTDP 13

art. 11070901

TDP0.2 LT-4 B10 55 tachogenerator

• Rotor moment of inertia: 1.1 kgcm²
• Permissible load on the shaft: ≤60 N (axial), ≤80 N (radial)
• Housing material: Die-cast aluminum
• Shaft material: Stainless steel
• Operating temperature: -30...+130 °C
• Protection: IP 55.

TDPZ 0.09

• Shaft type: ø11 mm solid shaft
• Permissible load on the shaft: ≤300 N axial, ≤450 N radial
• Flange: EURO flange B10

Baumer TDPZ 0.2

• Open circuit voltage 10…150 mV per rpm
• Redundant output (TDPZ)
• EURO flange B10 or housing foot B3

TDPZ 0.2 + FSL

• Open circuit voltage 10...150 mV per rpm
• EURO flange B10 or housing foot B3
• Redundant tachogenerator output (TDPZ)
• High signal quality due to patented LongLife technology

Baumer TG 74 d

• Tachogenerator / ATEX
• Ex-approved by ATEX II 2 G Ex db eb IIC T6 Gb
• Low response time
• Solid shaft ø14 mm
• EURO flange B10

Baumer TIL

• Through hollow shaft ø10 to ø16 mm
• Max. 2048 pulses per revolution
• Optical sensing method

Baumer TIL Y 1

• Blind hollow shaft ø12 mm
• Max. 2048 pulses per revolution
• V-Lock clamping
• TTL or HTL output signals

Baumer X 700 - CANopen®

• Encoder multiturn / CANopen® / ATEX
• Optical sensing method
• Resolution: singleturn 18 bit, multiturn 14 bit
• Clamping flange with solid shaft ø10 mm
• Explosion protection per Ex II 2D/2G (ATEX)
• Device class 2 / zone 1 (gas), zone 21 (dust)

Baumer X 700 - Profibus

• Encoder multiturn / Profibus / ATEX
• Optical sensing method
• Resolution: singleturn 13 bit, multiturn 16 bit
• Clamping flange with solid shaft ø10 mm
• Explosion protection per Ex II 2D/2G (ATEX)
• Device class 2 / zone 1 (gas), zone 21 (dust)

 Baumer X 700 - SSI Multiturn

• Encoder multiturn / SSI / ATEX
• Optical sensing method
• Resolution: multiturn 13 + 12 bit
• Clamping flange with solid shaft ø10 mm
• Explosion protection per Ex II 2D/2G (ATEX)
• Device class 2 / zone 1 (gas), zone 21 (dust)

art. 11116859

Mini Optical Incremental Encoder

art. 10153305

• Incremental hollow shaft encoder
• Size (flange): ø58 mm
• Shaft type: ø12 mm (blind hollow shaft)
• Reading method: Optical
• Housing material: Aluminum

art. 11113010

• Encoder with blind or through hollow shaft ø12 mm
• Optical sensing method
• Max. 5000 pulses per revolution
• Small profile depth

art. 10153169

 art. 11129466

Relay modul for Heavy Duty speed switches (speed monitors)

art. 11223024

Programmable Incremental Encoder with through hollow shaft

EIL580P-TT14.5FF.01024

• Size ø58 mm
• Precise optical sensing (interpolated)
• Output signal level programmable (TTL)
• Through hollow shaft, ø14 mm
• Flange connector M23, 12-pin CCW, radial
• Pulses per revolution 1...65536, programmable

gi355

• Encoder with solid shaft ø10 mm or ø6 mm
• Max. 6000 pulses per revolution
• Optical sensing method
• Clamping or synchro flange
• Industrial standard
• High rotation speed up to 10000 rpm

gi355 encoder

• Resolution: 500 pulses per revolution
• Measurement method: optical

baumer gi355

• Measurement method: optical
• Shaft material: stainless steel
• Body material: aluminum

Longlife-DC-Tachogenerator

art. 11125617

Baumer absolute encoder XMMS.W203EA2 with singleturn resolution 13 bit and multiturn 16 bit.

art. 11088324

PROFIBUS DPV2/CONNECTOR M12 MT