Endress+Hauser Liquid analysis

Free chlorine transmitter

Chor / Chlordioxide and pH/ORP Sensor.

- Chlor/Chlordioxid, pH, Temperatur : 0/4-20mA- Profibus- Hart + 0/4-20mA

Free chlorine transmitter

Chorine / Chlordioxide and pH/ORP Sensor.

- Chlorine/Chlordioxid, pH, Temperature : 0/4-20mA- Profibus- Hart + 0/4-20mA

Liquid Conductivity Sensor

1-channel transmitter

0/4-20 mA, Hart, Profibus.

IP65

One-channel transmitter

0/4-20mA, Hart, Profibus.

IP65

Liquid Oxygen Sensor

1-channel transmitter

0/4-20mA, Hart, Profibus.

Liquid Oxygen Sensor

1-channel transmitter.

0/4-20mA, Hart, Profibus.

Liquid PH and ORP analysis sensor

One-channel-transmitter

0/4-20 mA, Hart, Profibus.

IP65

One-channel-transmitter

0/4-20mA, Hart, Profibus.

No

Liquid Oxygen Sensor

Liquid Oxygen Sensor

Turbidity Analysis Sensor

Conductivity:
0 ВµS/ cm...100 mS/ cm
Build-up thickness:
0 mm...10 mm

-20В°...+100В°C
(-4В°F...+212В°F)
+150В°C (+302В°F) for 1h

Vacuum...25 bar
(Vacuum...362.5 psi)

Capacitive- conductive

Liquid PH and ORP analysis sensor

20 analog (max) (U, I, TC, RTD, frequency, pulse)
20 HART (max) (HART, 4...20mA)
14 digital (max) (control, event and counting inputs)

12 relays (max)
2 analog (max) (I, pulse)
1 transmitter power supply

TFT 7" colour graphic display
TFT 7" colour graphic display with touch panel

internal memory
SD card
USB flash drive

Mass/heat quantity
heat quantity difference

0.1 to 10 mg/l total chlorine

5 to 45 В°C
(41 to 113 В°F)

1 to 4 bar (14.5 to 58 psi)

Total chlorine consists of free chlorine (HOCl, OCl-) and bound chlorine (chloramines)
All components are reduced at the working electrode
Almost pH independent

Trace: 0 to 5 mg/l ClO2
Standard: 0 to 20 mg/l ClO2
High: 0 to 200 mg/l ClO2

0 to 55 В°C , non-freezing
(32 to 130 В°F)

Max. 2 bar abs
(Max. 29 psi abs)

Trace: 0 to 5 mg/l HOCl
Standard: 0 to 20 mg/l HOCl
High: 0 to 200 mg/l HOCl

0 to 55 В°C (32 to 130 В°F), non-freezing

Max. 1 bar (max. 14.5 psi)

Closed, membrane covered measuring cell
Reduction of free chlorine at the cathode

Trace: 0 ... 5 mg/l HOBr
Standard: 0 ... 20 mg/l HOBr
High: 0 ... 200 mg/l HOBr

+0...55 В°C (32 ... 130В°F), non-freezing

Max. 1 bar (max. 14.5 psi)

0 to 2 mg/l

+0 to 45 В°C (32 to 110 В°F), non freezing

1 bar (14.5 psi), 2 bar (29 psi) absolute

- closed 2 electrode system
- conversion of ozone into a signal current in nA
- signal current is proportional to the concentration of ozone
- the measurement is not pH dependent

5 ОјS/cm to 200 mS/cm

0 to 100 В°C (32 to 212 В°F)

1 bar, not intended for continues measurment in process

k=0,01: 0.04 to 20 ВµS/cm
k=0,1: 0.10 to 200 ВµS/cm

Threaded with fixed cable:
-20 to 100 В°C (-4 to 212 В°F)
Threaded with plug-in head:
-20 to 120 В°C (-4 to 248 В°F)
Sterilization: max. 140 В°C (284 В°F) for 30 minutes

13 bar at 20 В°C (188 psi at 68 В°F) absolute
1 bar at 120 В°C (14 psi at 248 В°F) absolute

k=0,1: 0,04 to 500 ВµS/cm

-5 to 120 В°C (23 to 248 В°F)
For Sterilizsation: max. 150 В°C at 5 bar
(Max. 302 В°F at 73 psi)

13 bar at 20 В°C (188 psi at 68 В°F)
9 bar at 120 В°C (130 psi at 248 В°F)

k=1: 10 ВµS/cm to 20 mS/cm

-20 to 135 В°C at 3.5 bar abs
(-4 to 275 В°F at 50 psi)

17 bar abs at 20 В°C
(246 psi at 68 В°F)