Baumer

art. 11045447

art. 10215003

art. 10151058

g0333

• Encoder with through hollow shaft ø12 mm
• Optical sensing method
• Max. 80000 pulses per revolution
• Clamping ring on housing

g0355

• Encoder with solid shaft ø10 mm or ø6 mm
• Max. 80000 pulses per revolution
• Industrial standard
• Clamping or synchro flange
• High rotation speed up to 10000 rpm
• Compact design
• High resistance to shock and vibrations

g0356

• Encoder with solid shaft ø10 mm or ø6 mm
• Max. 80000 pulses per revolution
• Industrial standard
• Clamping or synchro flange
• High rotation speed up to 10000 rpm
• Compact design
• High resistance to shock and vibrations

G0M2H 

• Reading method: Optical
• Hollow shaft diameter: up to 14 mm
• Supply voltage: 10...30 V DC
• No load consumption: ≤50mA (24VDC)
• Interface: SSI, additional incremental output (optional)
• Maximum rotation speed: 6000 rpm

G0MMH absolute encoder

• Relative humidity: 95 % without condensation
• Protection: IP 54, optionally IP 65
• Maximum rotation speed: ≤6000 rpm
• Housing material: aluminum
• Weight: approx. 600 g

 GA210 

Size (flange): Ø58 mm
Shaft type: Ø10 mm, solid shaft
Flange: Clamping flange

Interface: 10 parallel outputs
Function: Single-turn

ga240

• Encoder singleturn / parallel
• Optical sensing method
• Resolution: 13 bit
• Clamping flange
• Short-circuit proof push-pull outputs
• Output release by enable signal

ga240

• Encoder singleturn / SSI
• Optical sensing method
• Resolution: 14 bit
• Clamping flange

GBA2H absolute encoder

• Operating temperature: -25...+85 °C, -40...+85 °C (optional)
• Relative humidity: 95 % without condensation
• Resistance: EN 60068-2-6 Vibration ±0.75 mm - 10-58 Hz, 10 g - 58-2000 Hz, EN 60068-2-27 Impact 200 g, 6 ms
• Weight: approx. 400 g
• Connection: M23 connector, 12-pin, 1 m12 cable.

GBA2S absolute encoder 

• Temperature range: -25 to +85 °C (optionally -40 to +85 °C)
• Degree of protection: IP 54, optional IP 65
• Weight: approx. 250 g

GBA2W is a solid shaft encoder available 

• Detection method: Optical
• Resolution: Maximum 19 bits
• Flange: Clamp or synchronous
• Initialization time: Typically 20 ms after power on
• Optional incremental output: Available on request
• Zero point adjustment: Electronic
• Input of counting direction: Yes

GBAMS

• Measurement method: Optical
• Power supply voltage: 10...30 VDC
• Size (flange): ø58 mm
• Diagnostic function: Position or parameter error

GCA cable sensor

• Cable diameter: 0.8 mm
• Pulling force: ≤11 Н
• Retraction force: >3 Н
• Linearity: ±0.02 %

ge244

• Size (flange): Ø58 mm
• Shaft type: Ø10 mm solid shaft
• Flange: Clamping flange
• Protection: EN 60529 IP 67

ge355

• Size (flange): ø58 mm
• Shaft type: ø10 mm solid shaft (clamping flange)
• Permissible load on the shaft: ≤20 N axial, ≤40 N radial
• Flange: Clamping flange

ge404

• Size (flange): ø58 mm.
• Shaft type: ø10 mm solid shaft.
• Flange: Clamping flange.
• Protection EN 60529: IP 67.
• Supply voltage: 10...30 V DC.

GEMMH

• Reading method: Optical
• Resolution:
• Single revolution: 13 bits
• Multi-turn: 16 bits
• Hollow shaft diameter: up to 14 mm
• Interfaces: CANopen®, EtherNet/IP, Profibus-DP, PROFINET
• Resistance to magnetic fields
• Self-diagnosis: High reliability thanks to self-diagnosis

GI356 incremental encoder - converts rotational motion into electronic signals for speed and position estimation.

• Size (flange): ø58 mm
• Shaft type: ø6 mm solid shaft
• Reading method: Optical

Baumer gm400

• Size (flange): Ø58 mm
• Shaft type: Ø10 mm solid shaft
• Flange: Clamping flange

gm401

• Technical data - mechanical design
• Size (flange): ø58 mm
• Shaft type: ø6 mm solid shaft
• Flange: Synchronous flange
• Reading method: Optical
• Code: Gray or binary