Endress+Hauser
Mass flow (liquid): В±0.20 %
Volume flow (liquid): В±0.30 %
0 to 70 000 kg/h (0 to 2570 lb/min)
Medium temperature range50 to +125 В°C (58 to +257 В°F)
Max. process pressurePN 40, Class 300
Wetted materialsMeasuring tube: 1.4539 (904L)
Connection: 1.4404 (316/316L)
-200 В°C ... 200 В°C
(-328 В°F ... 392 В°F)
1bar abs...24.5 bar abs
15 psi...355.25 psi
up to В±2mm (+/- 0.08")
Max. measurement error
2%
Measuring range
0 to 56'550 m3/h
Medium temperature range
-20 to +120В°C
(-4 to +248В°F)
Max. process pressure
0 to 16 bar abs
Wetted materials
1.4435/316L
Liquid PH and ORP analysis sensor
Registrar
20 analog (max) (U, I, TC, RTD, frequency, pulse)
20 HART (max) (HART, 4...20mA)
14 digital (max) (control, event and counting inputs)
12 relays (max)
2 analog (max) (I, pulse)
1 transmitter power supply
TFT 7" colour graphic display
TFT 7" colour graphic display with touch panel
internal memory
SD card
USB flash drive
Mass/heat quantity
heat quantity difference
0.1 to 10 mg/l total chlorine
Process temperature5 to 45 В°C
(41 to 113 В°F)
1 to 4 bar (14.5 to 58 psi)
Measuring methodTotal chlorine consists of free chlorine (HOCl, OCl-) and bound chlorine (chloramines)
All components are reduced at the working electrode
Almost pH independent
Trace: 0 to 5 mg/l ClO2
Standard: 0 to 20 mg/l ClO2
High: 0 to 200 mg/l ClO2
0 to 55 В°C , non-freezing
(32 to 130 В°F)
Max. 2 bar abs
(Max. 29 psi abs)
Trace: 0 to 5 mg/l HOCl
Standard: 0 to 20 mg/l HOCl
High: 0 to 200 mg/l HOCl
0 to 55 В°C (32 to 130 В°F), non-freezing
Process pressureMax. 1 bar (max. 14.5 psi)
Measuring methodClosed, membrane covered measuring cell
Reduction of free chlorine at the cathode
Trace: 0 ... 5 mg/l HOBr
Standard: 0 ... 20 mg/l HOBr
High: 0 ... 200 mg/l HOBr
+0...55 В°C (32 ... 130В°F), non-freezing
Process pressureMax. 1 bar (max. 14.5 psi)
0 to 2 mg/l
Process temperature+0 to 45 В°C (32 to 110 В°F), non freezing
Process pressure1 bar (14.5 psi), 2 bar (29 psi) absolute
Measuring method- closed 2 electrode system
- conversion of ozone into a signal current in nA
- signal current is proportional to the concentration of ozone
- the measurement is not pH dependent
5 ОјS/cm to 200 mS/cm
Process temperature0 to 100 В°C (32 to 212 В°F)
Process pressure1 bar, not intended for continues measurment in process
k=0,01: 0.04 to 20 ВµS/cm
k=0,1: 0.10 to 200 ВµS/cm
Threaded with fixed cable:
-20 to 100 В°C (-4 to 212 В°F)
Threaded with plug-in head:
-20 to 120 В°C (-4 to 248 В°F)
Sterilization: max. 140 В°C (284 В°F) for 30 minutes
13 bar at 20 В°C (188 psi at 68 В°F) absolute
1 bar at 120 В°C (14 psi at 248 В°F) absolute
k=0,1: 0,04 to 500 ВµS/cm
Process temperature-5 to 120 В°C (23 to 248 В°F)
For Sterilizsation: max. 150 В°C at 5 bar
(Max. 302 В°F at 73 psi)
13 bar at 20 В°C (188 psi at 68 В°F)
9 bar at 120 В°C (130 psi at 248 В°F)
k=1: 10 ВµS/cm to 20 mS/cm
Process temperature-20 to 135 В°C at 3.5 bar abs
(-4 to 275 В°F at 50 psi)
17 bar abs at 20 В°C
(246 psi at 68 В°F)
1 ВµS/cm to 500 mS/cm
Process temperature-5 to 120 В°C (23 to 248 В°F)
Sterilization: max. 140 В°C at 6 bar for max. 45 min
(Max. 284 В°F at 87 psi for max. 45 min)
17 bar abs at 20 В°C (247 psi at 68 В°F)
9 bar abs at 120 В°C (131 psi at 248 В°F)
1 ВµS/cm to 500 mS/cm
Process temperature-5 to 120 В°C (23 to 248 В°F)
Sterilization: max. 140 В°C at 6 bar for max. 45 min
(Max. 284 В°F at 87 psi for max. 45 min)
17 bar abs at 20 В°C (247 psi at 68 В°F)
9 bar abs at 120 В°C (131 psi at 248 В°F)
0 to 200 %SAT
Process temperature5 to +60 ЛљC (23 to 140 ЛљF)
Process pressure1 bar, not intended for continues measurment in process
Standard sensor: 0 to 60 mg/l, 0 to 600 %SAT, 0 to 1200 hPa, 0 to 100 Vol%
Trace sensor: 0 to 10 mg/l, 0 to 120 %SAT, 0 to 250 hPa, 0 to 25 Vol%
-5 to 135 В°C (23 to 275 В°F)
Process pressure1 to 12 bar abs (14.5 to 174 psi)
0.01 to 100 mg/l
0.00 to 1000 %SAT
0 to 2000 hPa
-5 to 60 В°C
(20 to 140 В°F)
Max. 5 bar abs
(Max. 72.5 psi abs)